Wholesale Price Mono-Crystalline 60W Solar Panel to Sacramento Factories
Short Description:
In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for Wholesale Price Mono-Crystalline 60W Solar Panel to Sacramento Factories, We sincerely welcome domestic and foreign merchants who calls, letters asking, or to plants to negotiate, we will offer you quality products and the most enthusiastic service,We look forward to your visit and your cooperation.
Mono-Crystalline 60W Solar Panel
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 18.46V
Optimum Operating Current(Imp) 3.25A
Open Circuit Voltage(Voc) 22.51V
Short Circuit Current(Isc) 3.57A
Mechanical Characteristics
Cell Type Mono-crystalline 125 x 83mm
No of Cell 36 (4x9pcs)
Dimensions 821x554x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*83mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Le Liten travaille à améliorer les rendements et baisser les coûts de production de l’énergie solaire photovoltaïque. La création de l’institut INES, auquel le CEA est associé, a permis à la France de se positionner parmi les 4 principaux centres de recherche européens sur le sujet.
Want to make this lamp? Download your template here: http://bit.ly/1PLuX1u
Lighting is so important in any space and when you live in a rental apartment, your options are often limited, not to mention the fact that you don’t necessarily want to invest a whole lot of money for custom lighting. My NYC apartment had no lighting at all in the living room and even with a couple of table lamps, the space still felt too dark. I didn’t have much floor space to work with so I knew I wanted to have wall sconces but when I looked in stores or online for plug-in wall lamps that would work in my rental, I realized there were very few options out there. Plus the ones that I did find were well over $100 and didn’t fit the look I wanted. So I tapped into my inner MacGyver and set out to design wall sconces I could easily make in my apartment with just a drill and a few hand tools.
That’s how the TRESSE wall sconce came to be: it costs less than $25 in materials, it’s plug-in so you can mount it directly on a wall without needing to deal with wiring, and my design makes it easy to customize the shades and easily change them out if you move to a new apartment or simply want a different look.
Iron on edging (birch): http://amzn.to/1wypCSA
Clip-on candelabra light kit: http://amzn.to/1E2HXO6
Wall mounted switch and plug-in receiver: http://amzn.to/1yv3ARo
Corner guards: http://amzn.to/1GhMKwi
Aluminum sheet: http://amzn.to/1xxfQXa
Metal snips: http://amzn.to/18W53tW
For a complete resource guide, including materials, tools and supplies needed for this project, go to: http://www.engineeryourspace.com/how-to-make-a-wall-lamp/
Want to see what I’m working on next? Follow me on Instagram: https://www.instagram.com/eyspace/