Wholesale Discount Mono-Crystalline 60W Solar Panel to New Orleans Factories
Short Description:
Quality First,and Customer Supreme is our guideline to provide the best service to our customers.Nowadays, we are trying our best to become one of the best exporters in our field to meet customers more need for Wholesale Discount Mono-Crystalline 60W Solar Panel to New Orleans Factories, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
Mono-Crystalline 60W Solar Panel
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 18.46V
Optimum Operating Current(Imp) 3.25A
Open Circuit Voltage(Voc) 22.51V
Short Circuit Current(Isc) 3.57A
Mechanical Characteristics
Cell Type Mono-crystalline 125 x 83mm
No of Cell 36 (4x9pcs)
Dimensions 821x554x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*83mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This is our Pre-wired Midnite solar Off grid power setup for a 24 volt battery bank. We have an Outback inverter charger 3500 watts with a Midnite solar MPPT charge controller classic 150 pre-mounted and wired onto a Midnite solar E-panel with breakers ,surge protection, bus bars, shunt, Battery bank breaker (250 amps), AC bypass switch and more. This is the way to go for your D.I.Y. project! I also show you how I have both chargers programmed with related links below. Shop around and you will find cheaper prices.
http://www.midnitesolar.com/classic/classicCP.php
http://www.midnitesolar.com/productPhoto.php?product_ID=256&productCatName=Charge%20Controllers%20-%20Classics&productCat_ID=21&sortOrder=1&act=p
http://www.midnitesolar.com/productPhoto.php?product_ID=57&productCatName=E-Panel%20-%20Outback&productCat_ID=1&sortOrder=6&act=p
http://www.outbackpower.com/outback-products/inverters-chargers/item/vented-vfx3524?category_id=447
As a result of research and development, today SOLARTEC can produce thin-film silicon solar cell, which is the combination of amorphous silicon and microcrystalline silicon solar cell using Large batch and Single chamber TechniqueThis technique has been carried out by depositing thin film silicon onto a glass substrate which can yield high efficiency and lower cost. Moreover, there are plenty of raw materials.
