Wholesale Dealers of Mono-Crystalline 250W Solar Panel for Ghana
Short Description:
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for Wholesale Dealers of Mono-Crystalline 250W Solar Panel for Ghana, We warmly welcome all perspective inquiries from home and abroad to cooperate with us, and look forward to your correspondence.
Mono-Crystalline 250W Solar Panel
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.3V
Optimum Operating Current(Imp) 8.29A
Open Circuit Voltage(Voc) 36.76V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Julie Olson needed a traveling home for her mobile dog training business. With no architecture training, she drew up plans for exactly what she needed and sent them to Jason Dietz of Molecule Tiny Homes. Over a couple of months he built her home to her specifications: a fold-out porch, storage stairs, 2 lofts (1 for sleeping, 1 for storage or 2 sleeping quarters), a slim closet, and a bathroom with tub, composting toilet, tiny sink and escape window/door for viewing nature.
The 136-square-foot home can run completely off grid with rooftop photovoltaic panels, solar batteries, a propane tank and a tankless water heater. Total cost was $45,000, but Dietz says you could bring that down by about half if you built it yourself. Part of the reason small homes on wheels cost more per square foot is because they require structural support to survive on the road. The home was built in Santa Cruz, California and it made its first trip over 3,000 miles to Maine where Olson moved in with her cats and dog to travel and study.
Molecule Tiny Homes: moleculetinyhomes.blogspot.com
Original story: http://faircompanies.com/videos/view/tiny-home-packs-storage-stairs-2-lofts-tub-in-136-sq-ft/
The guys have a great time with Alan Bagh’s acting.
I’ve provided captions. The timing is a little off, but they’re serviceable.