How to Make a Photo voltaic Charging Bag

Look at far more How to Do Enjoyable Tech & Science Jobs video clips: http://www.howcast.com/video clips/271702-How-to-Make-a-Photo voltaic-Charging-Bag

In no way fret about a lifeless cell cellular phone once again! Cost your portable electronics by harnessing the electrical power of the sunshine.

Action 1: Take away the solar panel
Cautiously eliminate the solar panel from the light-weight fixture with a screwdriver. It need to have two wires soldered to a rechargeable battery. Detach the wires working with the wire cutters, and strip the finishes with the wire strippers.

Action 2: Examination the voltage
Spot the solar panel in immediate sunlight, and touch the favourable probe of the voltage meter to the panel’s favourable wire and the detrimental probe to the detrimental wire. The display on the voltage meter will give you a reading. You’re on the lookout for 5 volts, the output for a regular USB twine.

Tip
Make sure the meter’s probes are related effectively, or the voltage meter reading will be pretty small or detrimental.

Action 3: Include far more solar panels
If one particular solar panel does not present adequate volts to demand your machine, insert a different. Solder its favourable wire to the detrimental wire of the first solar panel. Examination the voltage once again. If it’s continue to not adequate, insert a third panel.

Action 4: Include a diode
Using the soldering equipment, solder the diode to the favourable wire. The diode will prohibit the move of electricity to one particular route. A stripe on one particular conclude of the diode tells which way the electricity will move as a result of it. Experience the diode stripe away from the solar panel, which will stop any stray present-day from flowing back into the solar panel.

Action 5: Include the USB twine
Minimize off the conclude of the USB twine that does not go into the digital machine you want to demand. Strip about a ¼ inch of the protective coating.

Action 6: Solder the USB twine
Solder the favourable and detrimental wires in the USB twine to the corresponding wires of the solar panel. If working with far more than one particular panel, solder to the panel with the unused wires. Then, take the panels out into immediate sunlight and see if they demand your machine.

Tip
To maximize the security of the solar panels, scorching glue them to a piece of cardboard.

Action seven: Sew the vinyl
Minimize out a piece of clear plastic vinyl somewhat larger than the dimensions of the panels to act as a sleeve. Obtain a location on your bag for the solar panels. Minimize a compact gap in the bag to in good shape the USB twine as a result of, and then sew a few sides of the vinyl plastic to the bag, immediately around the compact gap.

Action 8: Include the solar panels
Feed the USB twine as a result of the gap till you can slide the solar panels into the plastic vinyl sleeve. After you have the panels snugly inside the sleeve, sew the final aspect of the vinyl sleeve to the bag. Now get out there and electrical power up!

Did You Know?
In 2008, an unmanned aircraft flew nonstop for eighty two several hours, 37 minutes, powered totally by solar vitality.