Web-site: http://www.swimmingpoollearning.com/
Salt Mobile Cleaning and Salt Pool Treatment:
http://www.youtube.com/playlist?checklist=PL7730869A0603157E
Right here is how you repair and re-plumb your Swimming pool PVC pipes. It is not tough when you gather all the proper fittings and consider precise measurements. You can often redo it if you screw up so no anxieties.
Pool-Tite Glue Guidelines:
Dry examination to make guaranteed all fittings will slide effortlessly onto the pipes. Shake can well. Use a primer to clean up the pipe fittings (priming action is not desired for non-strain pipes significantly less than four” in diameter. Utilize liberal coat of cement to pipe depth of the socket, leave no uncoated surface area. Utilize a thin coat inside if the fitting, stay clear of puddling, Utilize a second coat to the pipe. Assemble parts Rapidly. Cement ought to be fluid. If cement surface area has dried recoat each parts. Thrust pipe firmly into fitting supplying it a ¼ turning movement. Hold pipe and fitting with each other for 30 seconds to stay clear of it popping out. Glue can get outdated so if it is gel like never use it.
You can use the Purple primer or the clear a single to prep the pipes. The Purple primer has a very strong dye in it so if you drip it will never arrive off, so the clear a single is significantly less messy.
Parts utilised (and exhibit)in the video:
2 INCH PVC Pipe Elbows
2 INCH PVC Fitting Extender WWP429-2010 or Pool PVC Pipe Plumbing Extender 2″ Mend Fitting 0303-20 (not utilised in this repair)
2 INCH PVC Coupling (also not utilised but may possibly be desired)
Pool-Tite PVC plastic pipe cement – Blue Glue “Sizzling” | one/2 Pint | 2356S (for gluing the fittings with each other)
2 INCH PVC Pipe four ft section
If you are inexperienced in accomplishing pool plumbing you can use a weighty glue that will give you more time to attach the fittings and pipes. I also uncover that the weighty glue is significantly less probably to leak verses the Pool Tite Blue glue if you never apply it correctly,
Weldon 12130 one/2 Pint 704 PVC Cement, Grey or if you can get it
Weldon Pool Significant 746 PVC Cement, Grey.
The key in this article is to rest and examine the region to be re-plumbed very carefully to see what will get the job done greatest. That is why the more fittings you have the less complicated the position will be. So mentally evaluate the proper places to slice and then commence the position slowly but surely. You also want to make guaranteed you can get every thing with each other just before you glue the very last piece on. So examination it even though the parts are dry (no glue) and see how you are heading to squeeze the very last fitting or PVC pipe on. The very last point you want is to have the PVC pipe or fittings glued on and then understand that there is no way to get the very last piece on.
The glue dries very fast so you have only a several seconds to attach the pipes and fittings. Use a generous volume of glue in any other case the pipes will leak and you will will need to do every thing again. If it will come out messy you can often spray paint the PVC pipes later on. I self-taught myself so I designed a good deal of rookie issues. Do not experience negative if you will need to recut and commence around. You will get the hang of it just be accomplishing it.
Connected Films:
Fixing A Pump Discharge Leak Updated & Revised Edition:
This is the discharge leak I also fixed at the identical account.
For a playlist on your “Pool Pump Not Priming:”
http://www.youtube.com/playlist?checklist=PL784D975AEA898B07&function=plcp
Post time: Jan-07-2017