Trending Products Mono-Crystalline 80W Solar Panel in Russia
Short Description:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Trending Products Mono-Crystalline 80W Solar Panel in Russia, Welcome to visit us at any time for business relationship established.
Mono-Crystalline 80W Solar Panel
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 15.90V
Optimum Operating Current(Imp) 5.03A
Open Circuit Voltage(Voc) 18.58V
Short Circuit Current(Isc) 5.59A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 36 (4x9pcs)
Dimensions 906x670x35mm
Weight 7.2KGS
Front Glass 3.2mm,High Transmission, Low iron, tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length: 900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Please LIKE my page on Facebook:
https://www.facebook.com/papermodels93
THINGS YOU WILL NEED:
- (Optional) Go to this link to get the template for the hat piece shapes and PRINT 2 OF THEM: https://www.facebook.com/papermodels93/photos/pb.482804608495518.-2207520000.1399249921./525440960898549/?type=3&theater
(You may have to enlarge the picture. For an average sized head, make sure the bottom part of the two front crown pieces are about 4 inches wide. If you have have a smaller or larger head, then enlarge or shrink the picture just a very small amount from the average size)
- 1 or 2 extra pieces of regular printer paper
- Pencil
- Colored penicils (optional)
- Glue
- Tape
- Scissors
- Thin pieces of cardboard
- PATIENCE!!!!!!!!!!
The height of the hat should be about 4.25 inches tall, and the length around the hat should be about 25.25 inches around (this does NOT include the length around the bill).
Also, you can leave a video response of the hat you made from this tutorial, I would really like to see them!!
Check out my other tutorial:
I finally installed my solar panels on top of my van!