Top Suppliers Mono-Crystalline 300W Solar Panel in Oslo
Short Description:
"Based on domestic market and expand overseas business" is our development strategy for Top Suppliers Mono-Crystalline 300W Solar Panel in Oslo, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
Mono-Crystalline 300W Solar Panel
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.45V
Optimum Operating Current(Imp) 8.15A
Open Circuit Voltage(Voc) 45.60V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1950x990x50mm
Weight 22.1Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
A new type of solar cell made of a calcium, titanium and oxygen material called perovskite is the rising star of the photovoltaics world. A team from Taiwan’s National Central University has developed a new process for making these new-generation solar cells that is very cheap while preserving the high efficiency of the device. As soon as the lights go on, two miniature wind turbines connected to square white panels begin rotating quickly. Driving these small windmills is the black material inside the white panel – new-generation perovskite solar cells developed by a research team from National Central University. Chiang Chien-hungNCU Photovoltaic Center ResearcherThis is our newly developed, high-efficiency perovskite solar cell. It maintains a high voltage even under weak light. With these solar cells, a 100 square centimeter solar panel can absorb any light generated indoors. And its costs are only about 1 percent of the cost of widely used monocrystalline silicon solar cells but they are 80 percent as efficient. Wu Chun-gueyNCU Photovoltaic Center DirectorIt’s especially efficient in weak light, maybe the best in weak light of all existing solar cells. The National Central University team’s results were published in a prestigious international journal. Researchers in several other countries, including Japan and England are also studying these new solar cells.
Right now,we made the biggest 200watt foldable solar panel for our clients, though it’s a little heavy,but you may hard to move a 200watt glass solar panel, but LINKSOLAR 200watt solar panel,you can put it in your bag.and take it everywhere. 10kg Gross weight.
