Top Suppliers Mono-Crystalline 200W Solar Panel for Zambia Manufacturers
Short Description:
No matter new customer or old customer, We believe in long term and trusted relationship for Top Suppliers Mono-Crystalline 200W Solar Panel for Zambia Manufacturers, Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
For more contact:
15/1, sathiyamoorthy nagar,
2nd cross,
thanthonimalai,
karur-639005.
contact no-9943699936,9943699926,9943699916
mail id- [email protected]
in this video, we go through setting up tower mounted solar panels, charge controller and repurposed battery for emergency communications in a grid down emergency.
How will you power your Comms gear in a blackout or power failure? Off grid solar backup power for emergency communications is a serious topic. For preppers and survivalists, the ability to get news and information despite a grid down scenario, will improve his/her chances of making an informed decision about safety. For ham radio operators participating in a grid down emergency communications scenario, their ability to keep their stations operational, despite the blackout in the outside world, quite simply, might save lives!
Read the background article at:
http://www.survivaltechnology.net/budget-solar-power-generator-for-emergency-communications/
Read about the QRP UltraPack project mentioned in the video here:
http://www.survivaltechnology.net/qrp-ultrapack-external-battery-pack-project/
The charge controller shown in the video is a MorningStar Sunsaver 10L. Video review coming up!
The Power Distribution board seen in the video can be purchased here:
Support the channel by mentioning this video when you order.
http://k9jeb.com/PDC.aspx
