Supply for Poly-crystalline Solar Panel 90W Supply to Philippines
Short Description:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
Supply for Poly-crystalline Solar Panel 90W Supply to Philippines, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
We are using pure solar power during the day when the sun is shining. We cook now with a GoSun solar oven most of the time as well to save on propane. Read the full article here: http://www.thedoityourselfworld.com/articles/article.php?id=11454
I have 1,000 watts of solar power going into our off grid electronics and wood shops. This powers all my rechargeable tools and equipment as well as any power tools when needed.
By the house I have 600 watts of solar panels so far connected to a small inverter. I use this power through an extension cord to power anything we need during the day. We have cut our electric bill to about 18 cents per day now. We hope to get the water pump off the grid too but with the electrical code and the 240 volt pump this will take some time.
We have been cooking our meals recently with a GoSun solar oven which we are reviewing. I just wanted to share with you for now yet another aspect of off grid living.
The solar cooker is providing us with hot cooked meals for free any time the sun is shining. It cooks even with some clouds.
The GoSun solar oven holds enough food for two people with no problem. Our recent meal today was salmon with rice and vegetables. I am surprised that even the rice turned out perfect.
You can find the GoSun stove here: http://amzn.to/2sACyzg
Thanks for watching. Please Subscribe & follow my daily videos.
Troy
http://www.thedoityourselfworld.com
http://www.theoffgridproject.com
Note: Copying this video, in part or in full, is a violation of copyright unless the user has express permission from the owner. Violation of this copyright will be pursued to the fullest extent of the law.
Begin by installing the L feet . Then install the rail . Join the rail if necessary . Then install the solar modules using end clamps and mid clamps.