Special Design for Poly-crystalline Solar Panel 90W Supply to Lithuania
Short Description:
To create more value for customers is our business philosophy; customer growing is our working chase for Special Design for Poly-crystalline Solar Panel 90W Supply to Lithuania, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit
Best price at: https://www.amazon.com/Renogy-Monocrystalline-Solar-Starter-Wanderer/dp/B00BSZUHRC/?tag=quang123-20
I am having a hard time getting my head around using 18650′s for a 12v application! If I put 3 cells in series at most I will get 12.6V and least 9V If I use every last mah in the pack! Now most of my gadgets refuse to work below 11V
So my problem is do I use 18650′s in a 3 cell pack and enlarge the pack in size and weight to achieve a larger capacity! Or do I compile a 4 cell pack with a higher voltage of 16.8v and utilize a god buck converter to bring the higher voltage down to a usable level and accept a loss of power in the stepping down process as heat?