Short Lead Time for Mono-Crystalline 60W Solar Panel for Montpellier
Short Description:
We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for Short Lead Time for Mono-Crystalline 60W Solar Panel for Montpellier, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
Mono-Crystalline 60W Solar Panel
Technical parameter
Maximum Power(W) 60W
Optimum Power Voltage(Vmp) 18.46V
Optimum Operating Current(Imp) 3.25A
Open Circuit Voltage(Voc) 22.51V
Short Circuit Current(Isc) 3.57A
Mechanical Characteristics
Cell Type Mono-crystalline 125 x 83mm
No of Cell 36 (4x9pcs)
Dimensions 821x554x35mm
Weight 5.0Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*83mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Part 2 in our video series on how to build your own DIY large solar generator. Before we start mounting all the various electronic components into the Pelican case for our solar Generator, it is a good idea to make sure everything is working correctly. We definitely would not want to discover we have a defective inverter only after mounting it and wiring everything else up around it.
See the full component list and build instructions here: https://www.modernsurvivalists.com/how-to-build-a-2000-watt-solar-generator-part-1/#.V1ydLGYVFaQ
Amazon links for major components used:
Inverter – http://amzn.to/1tp5Qyl
Solar Panel Kit – http://amzn.to/1tjLExb
Pelican 1620 Case – http://amzn.to/1UnvtJB
Optima Battery – http://amzn.to/28tf8cs
Music:
Shurk – Innocent Man – https://soundcloud.com/shirkofficial/
On June 9th, 2017 Tempress Systems B.V. part of the Amtech Group celebrated the opening of Europe’s largest bifacial PV solar plant of close to 400 kilowatt-peak (kWp) capacity in the Netherlands, using n-type PANDA Bifacial modules manufactured by China-based Yingli Solar. The plant is located next to the headquarters of Tempress in Vaassen, the Netherlands.
