Reliable Supplier Poly-crystalline Solar Panel 80W Manufacturer in Detroit
Short Description:
With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for Reliable Supplier Poly-crystalline Solar Panel 80W Manufacturer in Detroit, We welcome you to visit our factory and look forward to establishing friendly business relationships with customers at home and abroad in the near future.
Poly-crystalline Solar Panel 80W
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 18.13V
Optimum Operating Current(Imp) 4.70A
Open Circuit Voltage(Voc) 21.79V
Short Circuit Current(Isc) 5.16A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.3KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Forum post: http://forum.kerbalspaceprogram.com/index.php?/topic/143084-the-paper-airplane-challenge/&page=1
My Facebook page: https://www.facebook.com/JollyRogerAerospaceHome
Distance will be measured from the Launch clamps.
No Mods. Planes must be stock. (more below)
Parts allowed for the plane: flat wing sections, cubic struts or I-beams, struts(spacetape), 1- RTG or 2- small solar panels, 1- small battery(100 electric), 1- small SAS unit, 2- radial decouplers, up to 16 seperatrons(no other boosters or engines), minimum 1 command seat.
Rules:
1- No more than 70 parts for the plane.
2- Seperatrons can only be attached to the 2 decouplers.
3- I’m looking at the distance from the launch clamps.
4- No infin-glide(if still possible)
5- Launch from runway using launch clamps.
6- Land in the water intact.
7- F3 to prove distance and craft status.
8- Must have at least 1 Kerbal on board.
You may use anything you need to get the Kerbal onto the plane but no capsules or cockpits on the plane itself.
FURTHER DETAILS….
DEAR STUDENTS,
IEEE BASED EMBEDDED SYSTEM PROJECTS(hardware projects)/FINAL YEAR PROJECTS/MINI PROJECTS/DIPLOMA PROJECTS
INPLANT TRAINING DETAILS, (ECE/EEE/E&I/CSE/BIOMEDICAL/IT/MECHATRONICS/AYTOMOBILES)&MSC ELECTRONICS..
project details……project details……dont hesitate, pl call me……….,dont hesitate, pl call me……….,
thanks
R.ASHOK KUMAR
MAASTECH
89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK)
KODAMBAKKAM
CHENNAI-600024
PH:044-24844676
ASHOK KUMAR-098402 34766
ipt/projects full details….PL VISIT http://www.maastechindia.com (projects list,abstract,video,photo gallery)