Reasonable price for Mono-Crystalline 10W Solar Panel Slovenia Manufacturer
Short Description:
owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for Reasonable price for Mono-Crystalline 10W Solar Panel Slovenia Manufacturer, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
http://www.lensunsolar.com/lensun-solar-phone-chargers
Lensun uses ETFE integraded lamination technology on the solar charger NOT the cheap fabric, This ETFE laminated solar charger has non-adhesive surface properties. Highly stain-resistant and easily gets cleaned by the rain.
And ETFE integrated Lamination solar panels do not reflect the light. Dimple technology on the surface captures more sunlight and increases 5% solar absorption rate.
Please feel free to let us know if you need any more information, You can contact us via email or call us from Mondays to Fridays.
Contact information:
http://www.lensunsolar.com
Tel: UK +44 2032875806,
US +1 (323) 2845027,
China:+86 15759769602
Whatsapp: +86 15759769602
Skype: lensunsolar
Email: [email protected] , [email protected]
More panels on my shop roof connected to the 7 amp charge controllers.
Roof mounted (2) Siemens 55 watt attached with “Z” brackets thru the composition shingle roof. (2) Sunforce kits on pvc tubular frames laying flat.
The (2) Siemens SM55 mono panels are connected to the Sunforce 7amp regulators.
Cut out voltage 14.2v
Cut in voltage at 13v
The 11 amorphous panels are connected to (2) Harbor Freight model 96728 charge regulators.
Automatic overcharge protection 14.5v(+/-.5v)
Automatic discharge protection 11v (+/-.5v)
Wired from the regulators to the copper bus plates.
Combined solar power panels. 3 harbor freight 15watt amorphous, 8 Sunforce 15watt amorphous, 4 Siemens mono crystalline 55watt, 1 Sharp 80 watt poly crystalline, 2 Kyocera 80watt combined. Amorphous on separate 7 amp charge controllers. 12 AGM, 3 gel maintenance free batteries. 2 copper bars, 2 copper plates as bus connections. Mounted amp meter volt meter from bus plates. Mounted controllers and 1500 watt sine inverter volt meter amp meter gauges.
45 Watt Solar Panel Kit from;
http://www.harborfreight.com/
Sunforce 50048 60-Watt Solar Charging Kit from;
http://www.amazon.com
UB12350 Universal 12 Volt 35AH Battery batteries from;
http://www.batteriesasap.com/
Gauges from;
http://www.altestore.com/store/
http://bluesea.com/
Power Bright 1500 Watt Pure Sine Inverter & Battery cables from;
http://www.invertersrus.com/
Ultra-Conductive Copper (Alloy 101) bars from;
http://www.mcmaster.com/
Ground Mounting Rails, 1-1/4″ X 1-1/4″ 6ft 12 Ga from
http://store.wastewatersupplies.com/index.html
Hardware nots bolts, copper plates from;
http://www.mclendons.com/
Kyocera Sharp & Siemens Panels from ebay.