Rapid Delivery for Poly-crystalline Solar Panel 90W Factory for Nigeria
Short Description:
Our goal is to satisfy our customers by offering golden service, good price and high quality for Rapid Delivery for Poly-crystalline Solar Panel 90W Factory for Nigeria, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
TUTORIAL TO BUILD SOLAR TRACKER FOR PANEL. JUST NEED 2 SERVOMOTORS, 4 PHOTOSENSITIVES RESISTANCE, AND A SERVO TESTER OR A RECEIVER, CUT THE WIRES OF POTENTIOMETER OF SERVO, ISOLATE AND REPLACE HIM, EXTEND THE 3 OTHER WIRES OUT AND CONNECT THE FIRST RESISTANCE TO THE 1ST AND 2ND WIRES, CONNECT THE SECOND RESISTANCE TO THE 2ND AND THE 3TH WIRES, HERE YOU HAVE BUILD YOUR SOLAR POTENTIOMETER, MAKE THE SAME TO 2ND, DO IT YOURSELF ALL THAT YOU THINK SUSCRIBE ON MY CHANNEL!
SUN TRACK small little TRACKER PANEL SOLAR ENERGY SIMPLE MINI SERVOMOTOR photoresistor photoresistance ARDUINO TRACKING MINI MOTEUR PANNEAU SOLAIRE FAIT MAISON SOI MEME SELF MADE HACK PAN TILT HOMEMADERR
Step by step guide by Photonic Universe ([email protected] – please contact us for sales or advice) showing how to install a solar panel and charge controller onto your canal boat