Quality Inspection for Poly-crystalline Solar Panel 5W Wholesale to Macedonia
Short Description:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Quality Inspection for Poly-crystalline Solar Panel 5W Wholesale to Macedonia, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.
Poly-crystalline Solar Panel 5W
Technical parameter
Maximum Power(W) 5W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.56A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.62A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (3x6pcs)
Dimensions 175x270x18mm
Weight 0.65KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This video was a first attempt at using the YouTube capture and upload app on an iPad2. Seems OK.
This project was to put 30 LEDs in a circle in the rim of a plastic garden planter. I used a cut-down festoon of signage pixel LEDs. These are basically a parallel festoon of LEDs and resistors potted into a rubbery plastic designed to push-fit through a hole in a metal faceplate. I found 9mm was about the right size of hole in the plastic to grip them tightly.
They are powered by a cheap Poundland solar garden light originally designed to light a string of five plastic dragonflies. These little solar lights are actually very good. They’re designed for the British climate with our low levels of sunlight and run their LEDs at very low level to give a long run time each night for modest daylight exposure.
I cut off the original string of 5 LEDs and put on a two pin mini Molex connector, then soldered a matching plug on the string of signage LEDs, using a dab of hot melt glue on the back of the plug to strengthen the wire connection and also keep water away to try and reduce the inevitable electrolytic rusting that happens with DC and water.
The solar module runs the thirty LEDs at very low level, but they still produce vividly coloured dots of light even at such low current.
I also put a drop of oil in the little slide switch under the solar module to try and coat the internal contacts, as I find that the switches on these solar lights are very prone to corrosion and failure.
The LEDs were bought on ebay http://www.ebay.co.uk/itm/110767954466 and typically cost less than 5 GBP in a few different colour choices.
I power 500w 1200W Surge , pure sign wave Inverter.
Or is it ipower who cares 
)
Looking at the video again, i noticed my MISTAKE.
Amps Drawn was not as i said, it was more like just under 6 Amps.
This is my latest bit of kit to use with my Solar panels, Its November at the moment.
Most days its either overcast or raining, either way i will be using the ipower 500 as often as i can.
At the time of the video, the inverter had never been turned on.
I Power do make larger inverters, this little 500w one suits both my requirements and my pocket.
