Online Exporter Poly-crystalline Solar Panel 100W Poland Manufacturer

Short Description:


Product Detail

Product Tags

owing to good service, a variety of high quality products, competitive prices and efficient delivery, we enjoy a good reputation among our customers. We are an energetic company with wide market for Online Exporter Poly-crystalline Solar Panel 100W Poland Manufacturer, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products.


Technical parameter

Maximum Power(W)                       100W

Optimum Power Voltage(Vmp)        17.87V

Optimum Operating Current(Imp)    5.60A

Open Circuit Voltage(Voc)               21.45V

Short Circuit Current(Isc)                 6.17A

Mechanical Characteristics

Cell Type Polycrystalline                  156x104mm (6 inch)

No of Cell                                36 (4x9pcs)

Dimensions                            1120x678x35mm

Weight                                    9.7KGS

Front Glass                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                      IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                   600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • How to Build a Solar Panel
    00:00:32 Part 1 Assembling the Pieces
    00:00:39 1 – Purchase the cells
    00:01:13 2 – Measure and cut a board
    00:01:47 3 – Measure and cut all of your tabbing wire
    00:02:28 4 – Use the flux pen on each of the three squares (or strip) of each line (usually 2 or 3 lines) on the back of the cell
    00:02:44 5 – Melt a thin coat of solder on the squares/strips of the back of cells
    00:03:09 6 – Heat the first half of a tabbing wire on top of the soldered squares/strip to bond it to the cell
    00:03:27 Part 2 Connecting the Cells
    00:03:34 1 – Glue the cells to the board
    00:04:31 2 – Solder the cells together
    00:05:03 3 – Connect the first row using bus wire
    00:05:39 4 – Connect the second row
    00:06:15 5 – Continue connecting the rows
    00:06:34 Part 3 Building Your Panel Box
    00:06:41 1 – Measure your cell panel
    00:07:19 2 – Cut the flat back
    00:07:42 3 – Form the sides
    00:08:09 4 – Attach the sides
    00:08:35 5 – Paint the box
    00:09:06 6 – Attach the solar panel
    00:09:26 Part 4 Wiring Your Panel
    00:09:33 1 – Connect the final bus wire to a diode
    00:10:13 2 – Connect the wires
    00:10:36 3 – Connect your panel to a charge controller
    00:11:16 4 – Connect the charge controller to your batteries
    00:11:38 5 – Use the batteries
    00:12:01 Part 5 Sealing the Box
    00:12:08 1 – Get a piece of plexiglass
    00:12:40 2 – Attach block stops for the glass
    00:13:11 3 – Insert your plexiglass
    00:13:32 4 – Seal the box
    00:13:57 Part 6 Mounting Your Panels
    00:14:04 1 – You can mount your panels in different ways
    00:14:38 Tips
    00:19:06 Warnings
    00:19:20 Things

    Content taken from WikiHow http://www.wikihow.com/Build-a-Solar-Panel



    120W New Solar Cells
    Portable Folding Solar Panel Bag Blanket
    Plus 10A Regulator Waterproof
    and Car Charger Sockets USB Port
    More infomation: http://www.welinksolar.com.au/p120WPOWER.html

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !