Online Exporter Mono-Crystalline 200W Solar Panel Factory in Anguilla
Short Description:
We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Online Exporter Mono-Crystalline 200W Solar Panel Factory in Anguilla, We warmly welcome merchants from home and abroad to call us and establish business relationship with us, and we will do our best to serve you.
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
After buying our Starcraft pop up camper we set about modifying our RV camping trailer to improve the quality of our camping trips. Mods we made: 3 way refrigerator, additional storage space, outside gas stove, porta-poty, dog / pet bed, added microwave oven and others. View Part 2 http://youtu.be/oHeupJNpZls
This is the next online video on the photo voltaic panel installation. This is a incredibly awesome on the lookout career so considerably. If you missed the initial online video, be sure to see that a single initial:
https://www.youtube.com/look at?v=44ZMOB-ZQwc
In the initial portion of the photo voltaic panel installation I set up the batteries within a awesome batttery box which will double as a bench. Then I wired up the photo voltaic cost controller and a single photo voltaic panel to exam the system out. When it was doing work very well, that was the end for the working day.
The next step needed us to go purchasing and get some parts. We picked up some a hundred amp reduce off switches, 60 amp fuses and some crimp on connectors.
Since the holes in the crimp on connectors were as well modest for the switches I experienced to drill them out a little bit to make them fit.
Following I designed a board to keep the switches. This board is mounted within the box so we can link and disconnect the photo voltaic panels and also the output of the batteries.
When I experienced the switches mounted in the battery box then I linked a fuse on the output facet of the batteries for basic safety. This connects involving the optimistic direct of the battery lender to the swap. The other facet of the reduce off swap goes to the energy inverter.
Now there is AC energy.
Following I will link the fuse and swap for the photo voltaic panels, wire up the cigarette lighter socket and set up all the wiring properly.
You should see Portion A few of the installation right here:
https://www.youtube.com/look at?v=dGUQi2Z8BJg
Observe The Off Grid Project and get your household off the grid on a funds
http://www.TheOffGridProject.com
Join The Off Grid Project and The Do It Your self Planet forum and share your ideas, ideas and assignments.
http://www.thediyworld.com/forum
The Off Grid Project is offered by The Do It Your self Planet.
http://www.TheDIYworld.com
Experiments and assignments in off grid living, alternate strength, survival, climbing and far more.