OEM/ODM Supplier for Poly-crystalline Solar Panel 50W to Milan Importers

Short Description:


Product Detail

Product Tags

Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for OEM/ODM Supplier for Poly-crystalline Solar Panel 50W to Milan Importers, Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!


Poly-crystalline Solar Panel 50W

Technical parameter

Maximum Power(W)                         50W

Optimum Power Voltage(Vmp)        18.43V

Optimum Operating Current(Imp)    2.71A

Open Circuit Voltage(Voc)               22.48V

Short Circuit Current(Isc)                 2.98A

Mechanical Characteristics

Cell Type Poly-crystalline                  156 x 52mm

No of Cell                             36 (4x9pcs)

Dimensions                          678x542x25mm

Weight                                 4.2Kg

Front Glass                          3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                       IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 Materials of solar panel

1).Solar Cell——Poly-crystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • http://solar-panel-construction.com

    Construct your own solar panels for a portion of the price now!



    This is my own design, a picture diary of the basic construction of a truly Portable Power work Station. If you are out in the Boonies and need power to build then this is it! I built this on a dolly so that it is easy for one person to move. Remember to add a lager steel plate to the bottom of the dolly as the standard ones come with a very small plate. To do this just lay your new larger plate on top and drill ten holes through both plates and bolt them together, ( used hard wood for the wood frame and put the bolts right through all three). Remember to only buy a dolly that has solid rubber wheels for heavy loads about $60.00 . I put 2, 6 volt deep cycle batteries, 226 amp hours each wired in series to make 12volts. I would not put any more than that otherwise it becomes too heavy to move about easily. The solar panel is 100 watts and produces over 7 amps so make sure you buy a 20 amp charge controller just to be on the safe side and fuse the positive lines, I used 10 amp fuses but some people use 20 amp. Fuse between every device, Solar panel, charge controller and battery to inverter. There are many power levels for inverters, I choose the 1500 watt as it is the same as one house line and can power anything in a work shop. There are 2 kinds of inverters, modified sine wave, which is fine for most things like motors, drills, table saws, washing machines, but not for things that have compressors, like fridges, freezers, or plasma T.V. For those make sure you buy a pure sine wave inverter, as it will make smoother A.C. This unit can be turned to follow the sun and gives you freedom to live anywhere. Remember to put some cushioning between the back of the solar panel plywood frame and the Vertical box so that if it falls shut by accident it does not slam shut and perhaps crack the solar panel. Anyways enjoy the design, building and freedom it gives. All the best Harry

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    WhatsApp Online Chat !