OEM/ODM Supplier for Mono-Crystalline 250W Solar Panel to New Orleans Importers
Short Description:
With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for OEM/ODM Supplier for Mono-Crystalline 250W Solar Panel to New Orleans Importers, winning customers' trust is the gold key to our success! If you are interested in our products, please feel free to visit our web site or contact us.
Mono-Crystalline 250W Solar Panel
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.3V
Optimum Operating Current(Imp) 8.29A
Open Circuit Voltage(Voc) 36.76V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Ready for ESD: anti-static material: aeroFIX porous ceramic has the characteristic of electrostatic dissipation for the industries such as LCD, OLED, Semicon, PCB, Electronic components, solar cell, Film, etc
Be a part of craft stylist and mum of two Suzie Attaway in the studio to tutorial you as a result of how very simple it is to make this photo voltaic system!
Every necessary item you need to make this photo voltaic system is available in a helpful bundle at Hobbycraft for just £15. Shop now » http://ow.ly/StMxS
You Will Require :
Huge shoe box
Black acrylic paint
Posca white paint pen
Diverse sized polystyrene balls
Bamboo skewers
Orange, yellow, crimson, blue, green, silver and gold paint
Jug or polystyrene block
Gold paper
Glue
Fimo Soft in Peppermint and Sunflower
Fimo Effect in Glitter Blue, Agate Stardust and Metallic Gold
Huge needle
Very clear beading thread
Warm soften glue gun
Sticky tape
Black paper
Sensation motivated? Make confident to stop by the Hobbycraft web site for lots additional faculty challenge suggestions » http://ow.ly/Sov3k
We’d love to see your finished creation, tweet us a picture if you check out this you! @Hobbycraft
