OEM/ODM Manufacturer Mono-Crystalline 50W Solar Panel in Cannes

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of OEM/ODM Manufacturer Mono-Crystalline 50W Solar Panel in Cannes, We welcome you to join us in this path of creating a prosperous and efficient business together.

Technical parameter

Maximum Power(W)                        50W

Optimum Power Voltage(Vmp)        18.72V

Optimum Operating Current(Imp)    2.67A

Open Circuit Voltage(Voc)               22.83V

Short Circuit Current(Isc)                 2.94A

Mechanical Characteristics

Cell Type Monocrystalline              125×62.5mm

No of Cell                                        36 (4x9pcs)

Dimensions                                     636x554x25mm

Weight                                            4.2Kg

Front Glass                                     3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

The Xsol-E1.1 project explores the use of solar energy as a supplemental power source to extend UAD (unmanned aerial device) flight time. The project demonstrates how solar can be coupled with traditional lithium power cells. More detail here: https://www.youtube.com/watch?v=aCM1DTj8wXI

In this experiment, flight time is extended up to 250%. The configuration shown here uses a 3C 2200mah Litho power cell. Without solar assist, flight time averages 12 minutes. With solar assist, flight time is extended to an excess of 35 minutes at full solar intensity.

The is phase 1 of a 3 phased project.

Our ultimate goal is to build a fully functional low light operating UAV (drone) capable of not only sustained flight missions, but also the ability to fly in a low density atmosphere like the one found on Mars. We current the funding to completed Phase 1. However, Phases 2 (fully tested prototype version) and Phase 3 (production ready version) will require an estimated $300k additional funding for completion of the remaining phases by 2019. We would like this ‘drone’ to be ready for the first private exploration missions to Mars which are expected to occur by late 2019, early 2020.

The race to claim Mars is on! We anticipate the main purpose of the drone will be to collect detailed mineral and land formation data that can be used to determine potential resource deposits that are likely present on or beneath the planet’s surface for future private use.

ace barias semanas compre un paquete de celdas solares para acer paneles solares, cuando trate de soldarlas fue imposible el alambre no se derretia asi que lo guarde debajo de la cama asta que se me ocurriera una idea pasaron baris semanas compre wire glue para tratar pero cundo lo bi ni lo intente, ya tenia esta idea rondando mi cabesa pero espere un tienpo aber si encontraba un truco efectivo pero los consejos que vi no resultaban asi que coji el salten de freir lo puse en la estufa a fuego lento y ago la soldadura dentro sin problema