OEM/ODM Factory for Mono-Crystalline 30W Solar Panel Factory from Melbourne

Short Description:


Product Detail

Product Tags

Quality First,and Customer Supreme is our guideline to provide the best service to our customers.Nowadays, we are trying our best to become one of the best exporters in our field to meet customers more need for OEM/ODM Factory for Mono-Crystalline 30W Solar Panel Factory from Melbourne, Any requires from you will be paid with our best attention!


Mono-Crystalline 30W Solar Panel

Technical parameter

Maximum Power(W)                           30W

Optimum Power Voltage(Vmp)        17.66V

Optimum Operating Current(Imp)    1.71A

Open Circuit Voltage(Voc)                 21.39V

Short Circuit Current(Isc)                   1.88A

Mechanical Characteristics

Cell Type Mono-crystalline                125×41.6mm

No of Cell                                             36 (4x9pcs)

Dimensions                                        449x554x25mm

Weight                                                  2.8Kg

Front Glass                                         3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                        IP65 Rated

Output Cable                                      TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*41.6mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Get more info on Amazon-US: http://bit.ly/29kKvgJ
    300w Polycrystalline Solar Panel Model no: Sg-300spp. Nominal Output(pmax):300w. Cell Type:poly-crystalline panel. Dimensions:1956*992*45mm. Optimum Operating Voltage(vmp):36.28v. Current(imp):7.94a. Open Circuit Voltage(voc):44.75v. Short Current(isc):8.55a. Maximum Voltage:1000v Dc. Power Tolerance:+0.5w. Weight:26kg. Front Cover:low iron tempered glass. Frame Material:anodized aluminum alloy. Warranty:90% 10 years. 80% 25 Free from defects in materials and workmanship for 5



    I had a sunny day so I got to really test out my old forklift batteries on my tiny house solar power. I also had a special delivery today which I will tell cover in detail later.

    Since it was a bright, sunny winter day I was able to put the old forklift battery bank into manual equalize mode. My Tristar MPPT solar charge controller allows me to manually start an equalization. This means that the solar charge controller hits the battery bank with over 15 volts for a certain amount of time. This boils the acid in the battery cells and mixes the electrolyte up better. With time the heavier acid settles down and the lighter water rises. This creates an unbalanced chemistry in the battery and causes uneven distribution of power in the battery cell.

    Boiling the fluid in the battery with a higher voltage mixes the fluids better and also breaks up the lead sulfate on the battery plates. This brings the battery up closer to its full power capacity.

    While at Tractor Supply the other day I found a manual/automatic battery charger on sale. It was on clearance because it was stocked as a Christmas gift item. After the holidays they need to clear out old stock to prepare for new spring items. So I got an awesome deal on this charger.

    The battery charger has a 10 amp setting and can be set to manual mode which allows me to put 10 amps at 14.8 volts into my forklift batteries as long as I want. This allows me to run devices inside my tiny house on wheels when the sun is down even though the batteries are not running at full capacity.

    These old forklift batteries are badly sulfated. They were abused and I expect it will take a long time before they are performing well in my off grid solar application. But they are only temporary anyway until the reconditioned forklift battery arrives.

    Which, by the way, happened on this day. In the afternoon hours a van pulled in carrying my new/reconditioned forklift battery. This is a 3 year old 12 volt battery bank rated at 750 AH. And it comes with a one year warranty.

    This forklift battery will become the main power source for my tiny house when the sun is not generating power through the solar panels.

    I expect the new forklift battery to last me at least 20 years in my solar powered home.

    I used my harbor freight engine hoist to get the battery raised off the bed of the van while they drove it out from under the battery. Then I lowered it onto the ground for now.

    I have to fix my truck brakes before I can get the battery over to the tiny house.

    I plan to put the battery into the bed of the truck and then drive the truck over to the back side of the tiny house. Then lift the battery out with the HF engine hoist and lower it to the ground. Then I have to manipulate it into place on the pallet next to the other batteries.

    Follow my daily progress on the path to self sufficiency on my off grid solar homestead.

    https://www.youtube.com/user/techman2015/playlists?view=50&shelf_id=10&sort=dd

    Please donate to help keep The Off Grid Project ™ going: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3TQSWXLLRZ6HW

    Join The Off Grid Project ™ and The Do It Yourself World ™ forum and share your ideas, tips and projects.

    http://www.thediyworld.com/forum

    The Off Grid Project ™ is presented by The Do It Yourself World ™.

    http://www.TheDIYworld.com

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !