OEM/ODM China Mono-Crystalline 200W Solar Panel Wholesale to Canada
Short Description:
The company upholds the philosophy of "Be No.1 in quality, be rooted on credit and trustworthiness for growth", will continue to serve old and new customers from home and overseas whole-heatedly for OEM/ODM China Mono-Crystalline 200W Solar Panel Wholesale to Canada, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Our facilities in Liberia, Guanacaste [Costa Rica] currently generate 100% of its operating power requirements with renewable solar energy. The solar installation supplies additional energy needs during project, experiments, and the production of hydrogen. This solar panel installation was conducted in a partnership with Sibo Energy. http://bit.ly/2ozZT3q
Here is the solar charging system I made for my RV which will be parked for the season at the lake:
Three 12V 75Ah AGM batteries in parallel for a total Reserve Capacity of 225 Ah in plastic box with cover – $ 1000
One 135W 12V Solar Panel with 30′ of 10 AWG PV wire – $ 200
Morningstar SunSaver 20A PWM Solar Charge Controller – $ 120
Two LED Volt and Ammeters with 100A Shunts to measure load and solar supply. Bought from eBay – cheap $ 30 for both including shipping from China!
Breaker panel – $ 100
125A fuse and holder – $ 75
2 AWG welding cable – $ 200
1000 Watt Pure Sine Wave inverter $ 150
Total project price = $ 2000
Future upgrades:
Another 135W panel
I thought of getting a Trimetric 2025RV meter, but instead I think I will build my own with a Raspberry Pi and a A/D converter connected to the shunts. I would like to build a fuel guage showing how many Amp-Hours used and put back in from the batteries since it was last fully charged. I plan on uploading the data analytics up through 3G connection so I can access from my iPhone.