OEM Factory for Mono-Crystalline 50W Solar Panel to Lahore
Short Description:
In order to best meet client's needs, all of our operations are strictly performed in line with our motto " High Quality, Competitive Price, Fast Service " for OEM Factory for Mono-Crystalline 50W Solar Panel to Lahore, We are also constantly looking to establish relationship with new suppliers to provide innovative and smart solution to our valued customers.
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.72V
Optimum Operating Current(Imp) 2.67A
Open Circuit Voltage(Voc) 22.83V
Short Circuit Current(Isc) 2.94A
Mechanical Characteristics
Cell Type Monocrystalline 125×62.5mm
No of Cell 36 (4x9pcs)
Dimensions 636x554x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
rewiring my mini solar system to 24v from 12v…so i make one 24v 1000w pure sine wave inverter.this video just to sharing and dont ask me the circuit diagram…design this inverter has been sold to somebody for commercial purpose..
Nutella Bread Recipe: https://www.youtube.com/watch?v=8eHPkpCGdEY
Watch more Hot Water Heaters videos: http://www.howcast.com/videos/508811-Pros-and-Cons-of-an-Indirect-Water-Heater-Hot-Water-Heaters
Pros and cons of indirect water heaters. There are a couple if you have a heating system. A water heater itself, a stand-alone water heater burns at 62 percent efficiency. Heating systems have a higher efficiency upwards of 94 percent, and on the low side of 82 to 84 percent. So, automatically, just by having an indirect water heater, you’re going to gain a 20 percent greater efficiency by not having a stand-alone water heating tank. The indirect water heater is a lot more capable to deliver more hot water when you need it. So, the indirect is faster in recovery, has a much better efficiency rating and lasts a lot longer as well because there’s no flame underneath and no expansion to speak of, so we get a longer life out of an indirect water heater.