OEM China High quality Poly-crystalline Solar Panel 50W Manufacturer in Tunisia
Short Description:
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for OEM China High quality Poly-crystalline Solar Panel 50W Manufacturer in Tunisia, We will supply best quality, the most market competitive price, for every new and old customers with the most perfect green services.
Poly-crystalline Solar Panel 50W
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.43V
Optimum Operating Current(Imp) 2.71A
Open Circuit Voltage(Voc) 22.48V
Short Circuit Current(Isc) 2.98A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 52mm
No of Cell 36 (4x9pcs)
Dimensions 678x542x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Powering 12v LED light, charge mobile phone, 2xAA batteries, standing AC CFL lamp via small 100W DC to AC inverter.
Setup: 2x 30W Mono crystalline panels, 2x 9AH SLA battery, 30A LCD PWM charge controller
I got a second hand HF 45 watt solar panel kit off craigslist the other day and put it together. I also have another brand new kit that I got at a deep discount that I just put together. These together should help improve my tiny house off grid solar power.
The used set is an older version with rugged metal framing and no tool setup. It is a good set for camping or for moving around with because you simply put it all together without any tools. It goes together and comes apart in minutes.
I was going to assemble this inside until I realized that it is so easy and the panels themselves hold it all together.
I then put together my brand new Harbor Freight 45 watt solar panel kit inside the tiny home.
I assembled the frame inside and then took it out. I then put the solar panels on as well.
Next I connected the solar charge controller that comes with the kit. This is not connected to my off grid tiny house solar forklift battery bank. It is not much power but on rainy or cloudy days 45 watts of power is better than nothing.
I also hooked up one of the CCFL lamps that comes with the kit. I now have light in the off grid solar battery and rain water shed.
Thanks for watching. Please Subscribe and watch my daily videos.
Troy
http://www.thedoityourselfworld.com
http://www.theoffgridproject.com
