New Arrival China Mono-Crystalline 80W Solar Panel Kuwait Factory
Short Description:
We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for New Arrival China Mono-Crystalline 80W Solar Panel Kuwait Factory, Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!
Mono-Crystalline 80W Solar Panel
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 15.90V
Optimum Operating Current(Imp) 5.03A
Open Circuit Voltage(Voc) 18.58V
Short Circuit Current(Isc) 5.59A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 36 (4x9pcs)
Dimensions 906x670x35mm
Weight 7.2KGS
Front Glass 3.2mm,High Transmission, Low iron, tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length: 900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Pompe solaire Lorentz PS1800 c-sj5-12 alimentée par 12 panneaux solarworld-260w pour une puissance maximale de 3.12kwc
Un Panneau 110w couplé à une batterie 150ah alimente un DVR, 4 cameras et un routeur 4g, 24/24h 7/7j et 6 ampoules leds de 5w (4 au besoin et 2 automatiquement le soir) le tout en 12v et 5v pour une efficacité maximale
Pour votre installation solaire de tout type (pompage, résidentielle, industrielle …) vous pouvez contacter la société SASTRA:
https://www.facebook.com/Sastra-Energy-367443716712728/?fref=ts
Ray Byers Jr. & Eric Stikes of Byers Solar explain how solar works if the power goes out.
Get your Energy Rates under control by contacting one of our Solar Experts at 800-977-5323 or visit us at thatsbyers.com/products-services/solar/
RAY BYERS JR.: I have a solar system, power goes down in
the in the middle of the day in the summer time, for whatever reason they’re
doing maintenance, taking trees down, and
the power gets shut down, do I still have power at my house?
ERIC STIKES: That depends on what type of system that you have.
So that question is a little bit involved.
Typically the answer is no. And it’s a safety issue.
We don’t want to have the solar sending electricity back on to what are considered deadlines.
So the utility knows the power has gone down and this neighborhood no longer has power.
But the one person in the neighborhood, for example, might have solar.
They’re pushing power back on the lines and then someone gets injured.
Now that’s happened in the past unfortunately.
So this solar cannot be producing, cannot be sending, power back onto lines that are dead.
RAY BYERS JR.: What do i need to do is a homeowner to make sure that power is not being sent
back to the grid when the power does go down?
And I am producing power in my solar system?
ERIC STIKES: As a homeowner you need to find a reputable installer.
A license contractor.
And they will make sure that the power, that they’re a hundred percent code compliant.
And that means in addition to all the other safety issues that means they’re ensuring that
they’re code compliant and they’re not sending any power back, that your system isn’t sending
power back to the grid.
RAY BYERS JR.: So then does that happen at the time of installation or do they have to come out?
I have to call up say “hey you need to come out and there’s no power in the neighborhood.
I need you to fix it.”
Or is that something we were able to build in on the front end when we install the solar system?
ERIC STIKES: Yeah actually us as installers and homeowners we really don’t need to worry about that.
As installers, if we install according to the manufacturer’s specifications that safety is built into system.
So we don’t need to come out and install an automatic transfer.
We don’t need to come out shut the system down.
The homeowner doesn’t need to worry about it.
It’s all integrated into the system.
RAY BYERS JR.: Some manufacturers call it remote islanding where they’ll take and
utilize all of that power that’s being generated and not basically turn the
switch over to PG&E or your power utility at that point they pretty much dead switch that.
ERIC STIKES: Safety is anti islanding.
The language is islanding because there’s a system that you can create.
It’s an off-grid solar system that essentially creates a power island.
So when the grid goes down you can have power independent of the grid.
But that’s a little bit involved.
It does require backup power supply typically a battery bank.
And it also requires it that shut off system is in place.
So that the battery is producing, your home still has power, the utility is down, and you’re not sending power back
to the grid.
BQ-E5e