Massive Selection for Mono-Crystalline 200W Solar Panel to Latvia Factories
Short Description:
We have many excellent staff members good at marketing, QC, and dealing with kinds of troublesome problem in the production process for Massive Selection for Mono-Crystalline 200W Solar Panel to Latvia Factories, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
wattage jumps up and down between sun and clouds. (50 watt panel, not at correct angle)
edit: Turns out the lower wattage was more due to the panel being dirty than the angle. It now outputs around 45 watts in full, direct sun.
I’m using one of those “Chinese” grid-ties, 250 watt (in the event of a blackout, the grid tie inverter will shut down to prevent the energy it produces from harming any line workers who are sent to fix the power grid).
PARTE 2: https://www.youtube.com/watch?v=EEOBYulZ_fI
PARTE 3: https://www.youtube.com/watch?v=6mdBnIt0xIQ
Para 2 painéis de 240 watts cada:
#135 celulas solares 4w cada, total: 540 watts R$ 450.
(São 120 + 15 caso haja quebras)
#Pistola de aplicação + 2 Tubo De Silicone(300 ml) R$ 60.
#4 Solar-Tite(dois 384 e dois 7741-TE) R$ 100.
(ver modo de aplicar no ebay).
#2 Vidros Temperados 165 x 96 cm R$ 300.
(para Células de 6 x 6 = 156 x 156mm de Três faixas).
#10,5 metros Cantoneiras Alumínio R$ 100. (não polidas).
#Frete(Células e Solar-Tite) R$ 100.
TOTAL: R$ 1.110.
## Um Pronto no ML o mais barato de 245watts é R$ 999,
Dois R$ 2000 + 200 frete: TOTAL 2.200 ##
Obs: celula solar e solar-tite no ebay, cada painel solar
tem 10 linhas e 6 colunas de células.
DESENHO ESQUEMÁTICO:
http://www.flickr.com/photos/81952406@N02/7508641212/lightbox/
