Manufacturing Companies for Poly-crystalline Solar Panel 250W Wholesale to Durban

Short Description:


Product Detail

Product Tags

Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for Manufacturing Companies for Poly-crystalline Solar Panel 250W Wholesale to Durban, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.


Poly-crystalline Solar Panel 250W

Technical parameter

Maximum Power(W)                           250W

Optimum Power Voltage(Vmp)           30.25V

Optimum Operating Current(Imp)       8.26A

Open Circuit Voltage(Voc)                  36.61V

Short Circuit Current(Isc)                     8.89A

Mechanical Characteristics

Cell Type Polycrystalline                      156x156mm (6 inch)

No of Cell                                              60 (6x10pcs)

Dimensions                                           1640x990x40mm

Weight                                                   18.5KGS

Front Glass                                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                          IP65 Rated

Output Cable                                         TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):               -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • http://www.uec-electronics.com/mobile-power-products/power-generation/

    - Solar Power Collection
    - Hybrid Power Generation
    - High Density Energy Storage
    - Rapid ROI – Fuel, Maintenance, and Rapid Logistics
    - Reliable and Combat Proven

    UEC Electronic’s Ground Renewable Expeditionary Energy Network System (GREENS) saves fuel, money, and reduces the frequency of resupply missions. GREENS is the first viable solution to replace traditional fuel-fired generators. GREENS was developed as a USMC Program of Record but has applicability to both civilian and military customers. The system collects solar energy and converts it into useable power. Excess solar energy is stored in the array of high energy density battery systems (HEDBS) for use when solar energy is insufficient. The system is light-weight and man portable. The GREENS HEDBS is safe, and has been approved as UN/DOT Class 9 tested for commercial shipment.

    ———————————————————————————————————–

    One GREENS will provide up to 1kW of power, and up to five systems can be paralleled together to provide 5 kW of power. No formal operator training is required. System deployment time is quick less than 15 Minutes by an untrained user. The system can be used as a completely renewable solution, or can be used in a hybrid configuration with a generator. If used as a hybrid solution, the GREENS controller will auto-start the generator if necessary to recharge the batteries, and will run the generator at peak efficiency.



    When the sun is out we should all be taking advantage of it. Either through Solar electrical or solar heating. Up until now its been expensive or difficult to find a heater that takes advantage of the suns incredible heating power. Step by step video walks you through assembling this kit. All you need is a pair of scissors, a glue gun (and about 8-10 regular size glue sticks), a piece of 1 1/2 pipe at least 4 feet long and some flat black paint. Please come see our Indiegogo campaign!! http://igg.me/at/greenheat

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !