Manufacturer for Poly-crystalline Solar Panel 90W in Boston
Short Description:
We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for Manufacturer for Poly-crystalline Solar Panel 90W in Boston, Welcome your visiting and any your inquires,sincerely hope we can have chance to cooperate with you and we can build up long well business relationship with you.
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Air Conditioners, Solar Split AC, Solar Floor AC Unit. Price: PKR 57000. Location: Karachi Sindh, Pakistan Details. – Our Solar air conditioner units are similar to ..
The buildup of a warm flat roof starts with a good vapour barrier followed by insulation then more decking or just the roofing materials depends on if you want the roof soft or solid. Just what vapour barrier to use is not that clear. Is the silver foil to the back of the insulation OK to use for the vapour barrier? Is a sheet of plastic OK?
Go to some manufacturers websites and they will have several different vapour barriers. Unfortunately the answer is “depends on your roof and your property” calculations should be undertaken for each and every project, if not then the better the vapour barrier is, the more chances of it being correct.
The detailing of the warm roof is very important if gaps in the insulation are left cold bridging can occur and potentially sweating could happen.
Warm roof technology is still evolving so; please make sure your roof understands what he is doing we find that we get lots of phone call from the public explaining that their roofer has installed a warm roof with ventilation is this correct? NO.
For more information, please go to my website. http://www.londonflatroofing.co.uk/warm-roof-explained/
