Manufacturer for Mono-Crystalline 10W Solar Panel Supply to Muscat
Short Description:
"Based on domestic market and expand overseas business" is our development strategy for Manufacturer for Mono-Crystalline 10W Solar Panel Supply to Muscat, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
In this project, I made a simple Solar NightLight.
Stick it to the window and that’s it.
It will charge during the day and light up during the night.
To make one, you’ll need:
Solar garden light
Ping-Pong ball
A big suction hook
Some glue
My Youtube Setup ►http://amzn.to/2gutrvw
Tools I use ►http://amzn.to/2guylsx
———————————————————————-
Warning:Use this video content at your own risk.
———————————————————————-
Music:Kevin MacLeod
Title: Surf Inspector
Surf Inspector, Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/
———————————————————————-
Disclaimer:
Some of the links in description are affiliate links. If you’ll purchase an item via link, I’ll receive a small commission. Thank You for the support!
This video shows how to make a Solar Majon Jar from a Garden Light.
Instructables : http://www.instructables.com/id/DIY-Solar-Powered-Mason-Jar/
Materials and Tools Used :
1. Mason Jar : http://amzn.to/2d8y617
2. Solar Garden Light : http://amzn.to/2cngpMc
3. Frosted Glass Spray : http://amzn.to/2cAoc98
4. Masking Tape : http://amzn.to/2cHNt2j
5. Scissors : http://amzn.to/2cUaYnF
6. Card Board
7. Hobby Knife : http://amzn.to/2cA1Nwd
8. Glue Gun : http://amzn.to/2dberjR
