Lowest Price for Mono-Crystalline 10W Solar Panel Supply to Guatemala
Short Description:
We always work as a tangible team to ensure that we can provide you with the best quality and the best price for Lowest Price for Mono-Crystalline 10W Solar Panel Supply to Guatemala, Our mission is to help you create long-lasting relationships with your clients through the power of promotional products.
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
A small solar panel I made that charges my cell phone. Please excuse my ghettoness of cardboard being my base for the cells. It’s what I had quickly on hand, and I don’t really care that much right now. This is mostly experimental.
The specs are for both panels separately:
~4 volts
~.8 amps
Both panels are wired in series, so the total voltage is around 8.
The panels together charge a battery bank of 4 1.2 volt rechargable batteries, which then charge my cell phone.
I have not tested how long it takes to charge all 4 batteries from completely dead to fully charged, but I would say that it would take roughly around 1-2 hours.
I would also like to thank those who post useful videos on how to do build your own solar panels. They are very inspiring and very helpful. One in particular, RobertSmith3 is building a ~63 watt solar panel, in which I have found his videos to be quite informative and useful. Check his out:
Here’s the first of a few video’s from manufacturers of products we supply. This one introduces Jinko Solar.