Hot New Products Mono-Crystalline 200W Solar Panel Manufacturer in Finland
Short Description:
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for Hot New Products Mono-Crystalline 200W Solar Panel Manufacturer in Finland, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Laser cutting machine cutting 3mm Acrylic
With the advantage of fast cutting speed,high flexibility and clean cutting edge, CO2 laser cutting machine can achieve the perfectly acrylic circle cutting, even though the acrylic is 3mm thickness only. And if you use better quality acrylic,the cutting result will be better.
check http://www.clean-energies.org/Solar-Street-Lights_c_49.html All in one Solar Parking Lot Lights.
These LED solar street lights can be used for a wide variety of applications:
- Street lighting
- Area lighting
- Parking lot lighting
- Pathway lighting
Solar parking lot lights features:
- All in one aluminum construction
- Efficient solar panel,
- Intelligent charge controller
- Infrared motion sensor
- High capacity lithium battery
- Powerful LED
- Easy setup
- Automatic operation
Check our affordable LED solar street lighting solutions at www.clean-energies.org