High Quality Poly-crystalline Solar Panel 90W in Canberra
Short Description:
With reliable quality process, good reputation and perfect customer service, the series of products produced by our company are exported to many countries and regions for High Quality Poly-crystalline Solar Panel 90W in Canberra, We warmly welcome all interested customers to contact us for more information.
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
My AETPL 300Watt NABARD Model III Solar Power System Configuration:
1. Andromeda SOLITE Smart Hybrid Solar Inverter Model NO. NB824 800VA (24v) Inverter
2. Cable 2C x 2.5Sqmm – 15Mtrs.
3. Cable 1C x 2.5Sqmm – 1Mtrs.
4. Module Mounting Structure – 1 Sets
5. Exide Batteries: 2x150AH = 300AH Capacity with Double Battery Tubular Trolley
6. Andromeda PV Module – AB150 (Mono Model)
2x150Watt = 300Watt Solar Panels (These are Mono Panels. Mono are better then Poly Panels Trust me)
This solar system will cost you Rs75000 and the government will give you Rs30000 subsidy only on this solar syatem.
Have Any Questions just ask in the comment section.
Thanks
A list of solar panels and chargers can be found here: http://astore.amazon.com/m0711-20?_encoding=UTF8&node=6
This is a little project I’m running to test the performance of three solar panel types under varying conditions. The review covers crystalline, amorphous and CIGS (Copper Indium Gallium (di)Selenide) PVs. I’m also testing a MPPT vs PWM solar charger.
This is for my own interest and is not very scientific but I’m trying to learn along the way…enjoy.
