High Quality for Mono-Crystalline 10W Solar Panel to Niger Manufacturers
Short Description:
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for High Quality for Mono-Crystalline 10W Solar Panel to Niger Manufacturers, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success.
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Diy Photo voltaic Panels
in this video, we go through setting up tower mounted solar panels, charge controller and repurposed battery for emergency communications in a grid down emergency.
How will you power your Comms gear in a blackout or power failure? Off grid solar backup power for emergency communications is a serious topic. For preppers and survivalists, the ability to get news and information despite a grid down scenario, will improve his/her chances of making an informed decision about safety. For ham radio operators participating in a grid down emergency communications scenario, their ability to keep their stations operational, despite the blackout in the outside world, quite simply, might save lives!
Read the background article at:
http://www.survivaltechnology.net/budget-solar-power-generator-for-emergency-communications/
Read about the QRP UltraPack project mentioned in the video here:
http://www.survivaltechnology.net/qrp-ultrapack-external-battery-pack-project/
The charge controller shown in the video is a MorningStar Sunsaver 10L. Video review coming up!
The Power Distribution board seen in the video can be purchased here:
Support the channel by mentioning this video when you order.
http://k9jeb.com/PDC.aspx
