High Performance Mono-Crystalline 100W Solar Panel for Seattle
Short Description:
To meet the customers' over-expected satisfaction , we have our strong team to provide our best overall service which includes marketing, sales, designing, production, quality controlling, packing, warehousing and logistics for High Performance Mono-Crystalline 100W Solar Panel for Seattle, Welcoming interested companies to cooperate with us, we look forward to having the opportunity of working with companies around the world for joint growth and mutual success.
Mono-Crystalline 100W Solar Panel
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 18.66V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 22.72V
Short Circuit Current(Isc) 5.92A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm(5 inch)
No of Cell 36 (4x9pcs)
Dimensions 1200x554x35mm
Weight 7.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Solar Powered Off Grid House in 4k ultra hd
Never Be Without Power again.
My Three most used sayings are.
1) A house roof looks unfinished until it has solar panels on it.
2) A man is not looking after his family until he is producing his own power.
3) Solar systems can be kind of pricey at first. Having power when no one else does, PRICELESS
My videos are for information only, all work should be done by licensed contractors.
Please read and understand description before viewing this video. Thank you
By viewing the video you agree to the copyright act. You also agree to the copyright act as defined in the description of this video.
Please feel free to enjoy my Off-Grid / Grid Hybrid system and my LED lighting videos. as well as my many How to videos.
Video edited with
cyberlink powerdirector
Music Provided by
Licensed under a Creative Commons license
Purple Planet
Music: http://www.purple-planet.com
Bird song from
http://www.orangefreesounds.com/beautiful-birds-song-in-the-morning/
Remember if the power go’s Out Then only the people that Prepared will have Power and Lights. And because of the cost. They have just enough for there needs. NOT YOURS.
Please enjoy.
Sharing a link to my videos is fine.
Do not Download then Re Upload my videos in part or full without my written consent.
Copyright 2017 All Rights Reserved.
letter of demand for breach of copyright followed by full legal action for anybody breaching the copyright act.
Warning!!! – Any person and/or institution and/or Agent and/or Agency of any governmental structure including but not limited to the United States or The Australian Federal and State Governments also using or monitoring/using this website or any of its associated websites, you DO NOT have my permission to utilize any of my profile information nor any of the content contained herein including, but not limited to my videos or photos, and…/or the comments made about my photos or any other “picture” art posted on my profile. You are hereby notified that you are strictly prohibited from disclosing, copying, distributing, disseminating, or taking any other action against me with regard to this profile and the contents herein. The foregoing prohibitions also apply to your employee, agent, student or any personnel under your direction or control the contents of this profile are private and legally privileged and confidential information, and the violation of my personal privacy is punishable by law.
ALL RIGHTS RESERVED WITHOUT PREJUDICE
This is my Hobby. It just happens to power my house.
I also Design and build systems That work.
Enjoy
~~ RATE ~~ COMMENT ~~ SUBSCRIBE ~~ ASK QUESTIONS ~~
Video describing how one can easily integrate a DIY Automatic Load transfer Switch into an existing breaker panel. While this method probably doesn’t meet the national electric code standards for some sort of enclosure or junction box requirements, the finished product is 100% safe and meets all other NEC standards such as common-neutral to ground bonding and such.
If you attempt to re-create use a higher amp relay with a 120v rating of at least 20Amps…. I recommend the following relays:
JQX-62F with a 120V coil. Ebay seems to have the best prices out of china. These can be purchased with ratings up to 120amps and they appear to be DIN mountable. Make sure you are looking at the blue cube looking relay. There is a SPST low voltage relay out there with the same product number.
The products I used are:
Relays: Magnecraft 782XBXM4L (DPDT 120V Coil 15A@120V Ice Cube Type)
Din Sockets: Magnecraft 70-782D8-1
or Omron PTF08A-E
Standard DIN Rail
12GA Romex or Solid Copper Wire
System works great in every way except that these relays don’t seem to last very long at 15amps.
This is not an instantaneous transfer. There is a delay of a second or less which is actually preferred. Most ATS systems, even super expensive ones, generally have a transfer delay built in.
There are 2 concerns here:
1: Having a delay, even if it is a fraction of a second, preserves the Ground to Neutral Bond requirements of the system and makes the system conform to the NEC. because the neutral line is switched, there is never a chance for a double ground bond.
2: If the transfer was instantaneous, devices that depend on the phase timing of the power might be damaged or thrown out of whack by a new power source that is not close enough in phase timing. Things like induction motors/compressors, etc. Probably not a huge deal but it is a problem. ~
~
~~ My Collection of all the Best FORD 6.0L Stuff on Amazon:
http://astore.amazon.com/hh07f-20
