Good Wholesale Vendors Poly-crystalline Solar Panel 90W for UAE Factories
Short Description:
We emphasize development and introduce new products into the market every year for Good Wholesale Vendors Poly-crystalline Solar Panel 90W for UAE Factories, items won certifications with the regional and international primary authorities. For far more detailed information, please contact us!
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
This floodlight is different from the earlier ones in that it is based on a single flatter housing with both the LED and the ballast mounted in the same space. This particular light came supplied with a 20W green LED and matching ballast which is simply heatshrink sleeved and glued in the light.
The LED module is the common 10×10 array which is used in the 20/30/50 and 100W LEDs with a differing number of LED chips in the array. In this 20W version there are 20 1W chips mounted as two series lines of 10 chips. These strings of chips appear to be wired in parallel giving a probable voltage of about 30V at 700mA.
When I purchased this light I chose the one with green LED chips as I think it would look quite nice as a tree uplighter.
As with all Chinese lights like this it’s a good idea to check the integrity of the earthing to the casing. Once again the unit has been supplied with a very short flex just 7″ (170mm) long. (Which is actually quite annoying!)
http://300mpg.org/?p=3896
I rig up a 400 watt, 48V solar panel to charge a 1970′s electric car. This is direct charging, no use of an inverter, AC power, wall power, or other battery charger.
The sun shines on the panel and creates current that goes through a solar charge controller straight to the batteries.
Panel is sized to recharge the batteries in 5 hours of sun from a typical 50% battery discharge.
For the video previous to this one, please click: http://www.youtube.com/watch?v=f-PfHx1Ewb4