Good User Reputation for Mono-Crystalline 10W Solar Panel Factory in Marseille
Short Description:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Good User Reputation for Mono-Crystalline 10W Solar Panel Factory in Marseille, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Someone asked if my MR16 superflux PCBs would fit into the integrated downlight unit, and the answer is yes. They won’t clip in, but they could be tacked in with hot melt glue.
However, while checking this I suddenly realised that the LED lamp industry is using the round PCB it uses in MR16 and GU10 sized lamps as a standard size that fits into these downlight units and some globe style lamps.
I duly modified the 110V lamp that I recently completely destroyed the base of while opening, and after fitting it with a 400V 220nF cap and new leads I clipped it into the downlight case. it’s a perfect fit and provides a good even wash of light.
This does open up some possibilities for hacking and modding other LED lamps or even making custom specialist PCBs that fit in the downlight case.
The mppt controller plus 2 mono 150w panels (series connection 24×2=48v) charge the battery very good in cloudy weather, inverter under the load about 1,7kw water pump.
