Good Quality Poly-crystalline Solar Panel 80W Factory in Japan
Short Description:
We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for Good Quality Poly-crystalline Solar Panel 80W Factory in Japan, We sincerely welcome all guests to set up business relationships with us on the basis of mutual benefits. Please contact us now. You will get our professional reply within 8 hours.
Poly-crystalline Solar Panel 80W
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 18.13V
Optimum Operating Current(Imp) 4.70A
Open Circuit Voltage(Voc) 21.79V
Short Circuit Current(Isc) 5.16A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.3KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Solar panel is made by Poly Mechanical students which is use to charge the mobile battery …. 100% output and very impressed by the students that they made it under the guidance of sandeep sir
[email protected]
http://little bit.ly/1b9xK0N
You Conserve $20.00 (twelve%) Right now. Electrical Specs
Optimum Functioning Voltage (Vmp): eighteen.9V
Optimum Functioning Current (Imp): five.29 A
Open – Circuit Voltage (Voc): 22.five V
Limited- Circuit Current (Isc): five.seventy five A
Maximum Energy at STC: a hundred W
Functioning Module Temperature: -40°C to 90°C
Maximum Method Voltage: 600 V DC (UL) / a thousand V DC (IEC)
Maximum Collection Fuse Rating: 15A
STC: Irradiance a thousand W/m2, module temperature 25°C, AM=1.five
Mechanical Specs
Photo voltaic Cell: Mono-crystalline a hundred twenty five x a hundred twenty five mm (five inches)
No. of cells: 36 (4×9)
Proportions: 47 x 21.3 x 1.four in (1195 x 541 x 35 mm)
Weight: 16.five lbs (seven.five kg)
Entrance Glass: 3.two mm (.thirteen in)tempered glas