Good Quality Poly-crystalline Solar Panel 100W Factory in Houston

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Good Quality Poly-crystalline Solar Panel 100W Factory in Houston, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!

Technical parameter

Maximum Power(W)                       100W

Optimum Power Voltage(Vmp)        17.87V

Optimum Operating Current(Imp)    5.60A

Open Circuit Voltage(Voc)               21.45V

Short Circuit Current(Isc)                 6.17A

Mechanical Characteristics

Cell Type Polycrystalline                  156x104mm (6 inch)

No of Cell                                36 (4x9pcs)

Dimensions                            1120x678x35mm

Weight                                    9.7KGS

Front Glass                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                      IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                   600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

www.PortableSolarPower.Biz

This is our new LFP 100 v3 Portable Solar Power Generator System that uses the latest technology available to turn sunlight into usable electricity anywhere on earth that the sun shines. We have been building portable solar power systems for many years now and we constantly keep improving out designs to make them easier to use.

This system is very easy to use and operate something we like to call “Idiot Proof” so you do not need to be a rocket scientist to use our systems. We use a 1 Button System to turn the system ON/OFF and the same button will also reset our system from any fault conditions that may occur. If you want something that works and is easy to use then keep reading.

This system can be recharged via regular AC Power or Solar Power so if the power grid goes down all you need is sunlight and solar panels to harvest real electricity during the daylight hours that can be used instantly or at night when there is no sunlight available. If a natural or man made disaster happens there will be no gasoline for gas powered generators but there will be sunlight more than likely.

Our system can power devices that run on up to 1250 Watts AC Continuously or DC power up to 1920 Watts at 12.8v DC. This means you can power 100,000 of different devices that we normally use over the course of a normal or not so normal day. Below we will list some of the equipment we have powered from this particular system:

Refrigerator / Freezer
Toaster Oven
Microwave Oven
Vacuum Cleaner
Big Flat Screen TV
Laptop Computers
Cell Phones
12v and 120v AC Powered Fans
Battery Chargers for Power Tools
Circular Saw
Emergency Water Filtration System
Portable Film Cameras – Photography & Video Production Units
Hair Dryer
ShopVac
Various Lights – CFL & LED
Just Start Vehicle
ect, ect, ect…….

This system has a “Lithium Iron Phosphate” LiFePo4 battery which has a capacity of 100 Amp Hours / 1280 Watt Hours / 1.28 Kwh. The weight of the main case is 60 pounds which is great when you compare it to competitors 100Ah systems that use old heavy battery technology called AGM or Lead Acid Batteries that weigh in a 100+ pounds or 40-60 more pounds over our system.

Why LiFePo4 Batteries?

High Performance —High theoretical capacity of 170mah/g and high practical capacity as high as 165mah/g
Extremely Safe/Stable Chemistry: no explosion & will not catch fire under collision over charged or short circuit; hi thermal stability of phases up to 500C
Wide working temperature range: From -4 F to 150 F (-20 C–+70C)
Long Cycle Life: up to 2000 cycle life (8x of Lead Acid and 3-4x of Li-ion)
Flexible & Small Form Factor: 1/3 weight of lead acid and 64% of NiMH
Environmentally Friendly Non-toxic, non-contaminating and No rare metal
Fast Charging: fully charged in a very short time —1C fast charge within 1.25 hours
High Efficiency Gives Back 100-95% of the power you put in vs 60% for AGM Batteries under large loads

The battery is also rated to provide 2000 full charge/discharge cycles which is great compared to the heavier AGM batteries that will only last 300 cycles vs 2000 that LiFePo4 batteries give you when the drain the battery almost empty on a regular basis. The LiFePo4 battery also contains no toxic ingredients which is good for the earth. The battery will not ignite, explode, or catch fire unlike some other more dangerous Lithium batteries like Lithium Polymer or Lithium Ion batteries that can ignite and violently explode under certian conditions.

The last advantage that LFP batteries offer is that they usually provide right at 100% of their rated capacity when large amounts of power is pulled out of the battery, so you get 95-100% of the power you put into the battery back out vs the 60-70% from AGM batteries. When draining AGM batteries under high loads that 30-40% turns into heat and you never get to use or enjoy it.

This system can be recharged via a included 10 Amp/ 12 Hour AC Charger that can be plugged into any 120v or 240v AC wall outlet to recharge the battery from empty to full in about 12 hours. The system can also be recharged via solar power by plugging in solar panels to the solar input port which can handle 200 Watts of solar input continuously from our portable solar panels if desired. We also have 2 Hour Quick Chargers are also available upon request for additional cost.

Universal all terain solar panal stand – Installation demo