Factory wholesale price for Mono-Crystalline 80W Solar Panel Wholesale to Germany

Short Description:


Product Detail

Product Tags

With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Factory wholesale price for Mono-Crystalline 80W Solar Panel Wholesale to Germany, Welcome to contact us if you are interested in our product, we will give you a surprice for Qulity and Price.


Mono-Crystalline 80W Solar Panel

Technical parameter

Maximum Power(W)                        80W

Optimum Power Voltage(Vmp)        15.90V

Optimum Operating Current(Imp)    5.03A

Open Circuit Voltage(Voc)               18.58V

Short Circuit Current(Isc)                 5.59A

Mechanical Characteristics

Cell Type Monocrystalline               125x125mm (5 inch)

No of Cell                                         36 (4x9pcs)

Dimensions                                     906x670x35mm

Weight                                             7.2KGS

Front Glass                                     3.2mm,High Transmission, Low iron, tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length: 900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operating Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • In this video I discuss taking my Aquaponic BackYard System off the grid. I had a power failure and did not want this to happen with a full tank of valuable fish. Setting up the Renogy Solar System was extremely easy.
    Renogy is a renewable energy company that consists of three branches- solar, LED technology, and biomass. This company strives to produce high quality products that are affordable, so everyone has greater access to clean energy.

    The equipment used was:
    Renogy Solar Pannel (2)
    RV Batter (deep cycle) UB121000
    An Inverter (Convert Power from the battery to power the Pump)



    A fully automated and integrated plug and play off-grid solar system with a built-in inverter, battery, charge controller, solar panel (or other 12 volt) input, and an automatic transfer switch.

    This is a plug and play solar system concept that I built to demonstrate and test the viability of highly-integrated solar systems for the sake of reducing solar system installation costs, solar system moving costs, and expansion costs.

    This concept is something you can just buy at a hardware store and plug in (solar panel installation would be separate, of course). This works by simply connecting a solar panel’s negative and positive wires to the two solar input terminals on the side, you flip a switch, and it just works.

    If the battery is low due to cloudy weather or high energy usage, it will automatically switch your appliances over to the power grid until the solar panel has recharged the battery.

    It has been working perfectly so far. I encourage you to build your own and see the benefits that a self-contained solar system can provide.

    Parts:

    - 12 volt, 12 Ah SLA battery (UPS battery).
    - 400 Watt 120 Volt inverter (12 volt automotive inverter).
    - 10 Amp 12 Volt solar charge controller.
    - EFM8UB1, 8051-based microcontroller development kit.
    - 8-pin Relay: 250 Volts contact voltage, up to 10 amps.
    - TIP122 Transistor.
    - Texas Instruments LM7805 I.T 5 Volt voltage regulator.
    - Bar connectors.
    - Pin plugs/jumper wires for the MCU and transistor pins.
    - 120 Volt, 15 Amp power receptacle.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    WhatsApp Online Chat !