Factory wholesale Poly-crystalline Solar Panel 50W for Bangladesh
Short Description:
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Factory wholesale Poly-crystalline Solar Panel 50W for Bangladesh, We warmly welcome friends from all walks of life to seek mutual cooperation and create a more brilliant and splendid tomorrow.
Poly-crystalline Solar Panel 50W
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.43V
Optimum Operating Current(Imp) 2.71A
Open Circuit Voltage(Voc) 22.48V
Short Circuit Current(Isc) 2.98A
Mechanical Characteristics
Cell Type Poly-crystalline 156 x 52mm
No of Cell 36 (4x9pcs)
Dimensions 678x542x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Express-test polycrystalline solar panel Perlight PLM-150P 2 Ohm load (экспресс-тест поликристаллической солнечной панели Perlight PLM-150P на нагрузку 2 Ома. Половина СП через оконное стекло, потерь 40-50% мощности).
Details: https://raxp2.blogspot.com
Review of 2 of LED Sensor Light – Daffodil LEC010 – Rechargeable Magnetic Motion Sensor Light https://www.amazon.co.uk/gp/product/B01MXYZVCC/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
It has a rechargeable built in 950mAh lithium battery, and seems to charge up quite quickly the first time. I love the automatic sensing feature, the light lights up when you get within 3 metres of it and goes out 20 seconds after you exit its sensing range. I can think of so many places I can use this I may have to buy more: Under the stairs, the loft, cupboards, wardrobes, etc. It is also very easy to install, it has an 4x adhesive pads and also a magnetic field, I like the fact you don’t need tools, screws or nails to fit it. To install it peel the 3M back on the pads attached to the strip, then other side and attached where you would like the light to be, and place the light on the magnetic strip. Simple The design of it also looks quite sleek and stylish and I like its slim design. Love it. The lights I have are the 6000 K – 6500 K white LEDs and they are much brighter than I had previously expected.
These lights arrived in a retail box just like you would purchase in the high street so you can buy with confidence, comes easy to read English instruction and USB Micro charging cable. and made from a robust hearing wearing black plastic called ABS to prefect for draws, shelves and cupboards that are regularly used