factory wholesale good quality Mono-Crystalline 50W Solar Panel Factory for Bangalore
Short Description:
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for factory wholesale good quality Mono-Crystalline 50W Solar Panel Factory for Bangalore, We warmly welcome your participation based on mutual benefits in the near future.
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.72V
Optimum Operating Current(Imp) 2.67A
Open Circuit Voltage(Voc) 22.83V
Short Circuit Current(Isc) 2.94A
Mechanical Characteristics
Cell Type Monocrystalline 125×62.5mm
No of Cell 36 (4x9pcs)
Dimensions 636x554x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Learn how to replace the worn or broken back cover for Xperia Z2 by yourself. Recycle your old NFC. Follow the video step by step, and you can do DIY repair. Get original Xperia Z2 back cover at http://bit.ly/1aEMOts ; get custom Xperia Z2 back cover at http://bit.ly/1EhKeo3 ; get original Xperia Z2 Replacement Parts at: http://bit.ly/1DOQLmL .
Steps
1. Remove the back cover;
2. Peel off the old NFC from old back cover
3. Put your old NFC on the new back cover
4. Install new back cover.
Tools
1. Heat gun or hair dryer;
2. Suction cup – http://bit.ly/1Mbid2L;
3. Guitar picks – http://bit.ly/1E6tMWJ;
Tips: Don’t forget to clear the camera lens before you put back the back cover.
To learn to DIY repair other components or other phones, don’t forget to subscribe our Youtube and other channels:
Follow Us on Twitter: https://twitter.com/witrigs
Like Us on Facebook: http://www.facebook.com/witrigsgroup
Add Us on Google+: https://plus.google.com/+Witrigs-com/posts
Subscribe Us on Blog: http://www.witrigs.com/blog/
-~-~~-~~~-~~-~-
The expenditure of creating repair guide videos is trending up. Donate now if you feel our videos so helpful. https://www.paypal.me/witrigs/2
Like our Facebook Page https://business.facebook.com/Witrigs-1718915445072177/
-~-~~-~~~-~~-~-
http://www.wps.co.uk
Conformal coating systems provide environmental protection for PCBs against moisture ingress and destructive mechanical forces. At WPS, we have been encapsulating (potting), for over 25 years and can offer a range of encapsulants for a variety of applications. Our Asymtek Select Coat SL-940E machines are the fastest and most accurate on the market, capable of intelligent coating on selective parts of the board and applying coating to Mil-spec thickness.