Factory Supplier for Mono-Crystalline 200W Solar Panel to Sevilla Factory
Short Description:
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for Factory Supplier for Mono-Crystalline 200W Solar Panel to Sevilla Factory, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
1m 32led APA102 addressable strip
http://www.greeled.net/apa102-led.html
Model No. GE32RGB102A2 (non-waterproof)
GE32RGB102B2(IP65 waterproof)
GE32RGB102C2(IP67 waterproof)
Working Voltage: DC5V
Led QTY: 32eds/M
Led Type: SMD5050
IC Type: APA102 Chip Built In RGB LED
Dimension: 5000mm*12.0mm*4.0mm (IP67 waterproof)
5000mm*10.0mm*3.0mm (IP65 waterproof)
5000mm*10.0mm*2.5mm(non-waterproof)
Pixel QTY: 32pixels/m ,each led addressable
PCB Color: White or Black color
Brightness Level: 256 level
Emitting Color: RGB color
Emitting Angle: 160 Degree(120 Degree also available)
Waterproof IP grade:silicon tube IP67/glue sealing IP65/Non-waterproof
Trucks that sit on the lot for long periods of time have a hard time keeping batteries fully charged. This is because parasitic loads slowly drain batteries over time. If a truck sits for more than a few months it will more than likely require a jumpstart to get moving again.
Purkeys has developed a way to utilize energy from the sun to help counteract parasitic loads, in turn providing longer battery life. They have created a portable and easy to use solar converter called, the Solar Dash. According to Purkeys’ Chief Creative Engineer Bruce Purkey, “In the right sun conditions, the Solar Dash can provide enough energy to maintain a truck’s batteries from day to day.”
The Solar Dash comes with a 20W solar panel, conversion controller, and an adapter plug that plugs directly into a 12V power port, allowing fleets to maintain a high state of charge from inside the truck. It’s as simple as placing the panel on the dash, plugging it in, and walking away.
The system is great for dealers; allowing them to keep trucks ready to move, no matter how long they sit on the lot.
