Factory source manufacturing Mono-Crystalline 250W Solar Panel for Namibia Factory
Short Description:
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Factory source manufacturing Mono-Crystalline 250W Solar Panel for Namibia Factory, We welcome new and old customers to contact us by phone or send us inquiries by mail for future business relationships and achieving mutual success.
Mono-Crystalline 250W Solar Panel
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.3V
Optimum Operating Current(Imp) 8.29A
Open Circuit Voltage(Voc) 36.76V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Solar Panel using a Direct TV Satellite dish. 3V max voltage at 2A max current for a total of 6Watts of power. The solar panel glue melted after about 10 min. The panel came from a Thames and Kosmos Fuel Cell kit and was not designed to support that temperature. Temperature reached 125 deg F.
PARTE 2: https://www.youtube.com/watch?v=EEOBYulZ_fI
PARTE 3: https://www.youtube.com/watch?v=6mdBnIt0xIQ
Para 2 painéis de 240 watts cada:
#135 celulas solares 4w cada, total: 540 watts R$ 450.
(São 120 + 15 caso haja quebras)
#Pistola de aplicação + 2 Tubo De Silicone(300 ml) R$ 60.
#4 Solar-Tite(dois 384 e dois 7741-TE) R$ 100.
(ver modo de aplicar no ebay).
#2 Vidros Temperados 165 x 96 cm R$ 300.
(para Células de 6 x 6 = 156 x 156mm de Três faixas).
#10,5 metros Cantoneiras Alumínio R$ 100. (não polidas).
#Frete(Células e Solar-Tite) R$ 100.
TOTAL: R$ 1.110.
## Um Pronto no ML o mais barato de 245watts é R$ 999,
Dois R$ 2000 + 200 frete: TOTAL 2.200 ##
Obs: celula solar e solar-tite no ebay, cada painel solar
tem 10 linhas e 6 colunas de células.
DESENHO ESQUEMÁTICO:
http://www.flickr.com/photos/81952406@N02/7508641212/lightbox/