Factory provide nice price Mono-Crystalline 150W Solar Panel Mecca
Short Description:
Our mission is to become an innovative supplier of high-tech digital and communication devices by providing value added design, world-class manufacturing, and service capabilities for Factory provide nice price Mono-Crystalline 150W Solar Panel Mecca, We welcome you to join us in this path of creating a prosperous and efficient business together.
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
The point of this RV project is to create a long term boon docking RV without the use of most conventional RV ideologies.
When completed the unit will have 400w of solar charging a 620Ah battery bank. The 12v system is in the process of being engineered properly and for optimal use, which to many RVers surprise is not what they have been sold by dealers.
The system will not be RV specific so many designs will be applicable for off grid homes and other sustainable situations. Also the RV industry likes to slap an often 300% price increase just for adding the word RV in the advertising, so we will not be using “RV specific” equipment for the most part.
There will be no generator on board. Just our solid state generator… cough cough … I mean photovoltiac … cough cough… I mean solar panels to charge our almost all electrical system. Many people will try to tell me that it is not possible. Don’t Believe Me Just Watch!!! I mean subscribe. I am 99% positive the math is not lying to me.
The only appliance that is not electrical on the final build is the water heater which is a outdoor propane instant hot water heater. This was really the only item that mathematically did not line up with a full 12 volt electrical system. The appliance uses 1 gallon of propane per hour at max setting, so with our 20 gallon built in tank and some proper tuning it should last a while.
55 gallon water tank with a 60 gallon gray water tank. No black water tank as we are using a Nature’s Head composting toilet instead.
The finished product will be highly insulated with both dense foam and radiant reflective technologies. I will go over kill hear as it only aids my heating and cooling which will be the largest draw on my 12v system.
This is an interesting project, more money is being put into the remodel then on the vehicle itself. My friends have asked me why not just buy a newer RV? My answer is simple, they are still built in traditional ways and will need almost the same investment to upgrade to my design. Plus, mechanically, this thing is in excellent condition and ready for years of travel with basic maintenance. Cosmetically it needed lots of work, so perfect for my needs.
A lot of thought and time has gone into the working systems of this RV. I have designed all systems and will be installing every portion myself. Because of my mechanical mind I have already made some cosmetic mistakes that will be sure to be headaches in the future. I’ll tackle those one step at a time.
This is not a “look how much money I can pour into my stuff” project. Rather it is a “look how much I can save, while having a superior end product to those of industry standard”.
Hope you have fun watching my video posts on this project, but most of all, I hope we all learn something in the process.
This Is A Video Of My Renewable Energy System At Night In My Solar And Wind Shed / Shop ! ! I Now Have 2,550 Watts Of Solar Or 2.55 Kw ! Ice Storms On The Way Be Ready Be Prepared ! This Is A Video Of My New Project I Need More Power Especially For The Winter I Found More Room On My Solar And Wind Shop So Guess What I’m Adding A Complete New System Of 2- 120 Watt @ 12 Volt Solar Panels In Series To Make 24 Volts Plus A MidNite Solar KID 30 Amp MPPT Charge Controller And An Adjustable Racking System Built Bye Me ! Be Ready For Power Outages And Saving Money On Your Electric Bill !!! You can Find Me On Facebook , Skype , And Google + Many Thanks Please Subscribe Kenneth W Viar Jr or KVUSMC
