Factory Promotional Poly-crystalline Solar Panel 100W for Nicaragua
Short Description:
Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands for Factory Promotional Poly-crystalline Solar Panel 100W for Nicaragua, We are looking forward to establishing long-term business relationships with you. Your comments and suggestions are highly appreciated.
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 17.87V
Optimum Operating Current(Imp) 5.60A
Open Circuit Voltage(Voc) 21.45V
Short Circuit Current(Isc) 6.17A
Mechanical Characteristics
Cell Type Polycrystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1120x678x35mm
Weight 9.7KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*52mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
In this video the test set-up for the C2000 MPPT prototype is shown, with a 10W polycrystalline solar panel, connected to the prototype PCB. This was used for testing and tuning the Perturb & Observe algorithm. A full tutorial covering the electronics and C code can be found at my website Coder-Tronics.com by following the links below.
If you like the video and the tutorial please give it a thumbs up and support the site.
There is also an additional video which shows the tracking algorithm in operation, with the PV Power, PV Volts and Duty Cycle variables being graphed in Texas Instruments Code Composer Studio.
http://coder-tronics.com/c2000-solar-mppt-tutorial-pt1/
http://coder-tronics.com/c2000-solar-mppt-tutorial-pt2/
http://coder-tronics.com/c2000-solar-mppt-tutorial-pt3/
http://coder-tronics.com/c2000-solar-mppt-tutorial-pt4/
แผงโซล่าเซลล์ ชนิดโพลีคริสตัลไลน์ และโมโนคริสตัลไลน์ พร้อมอุปกรณ์โซล่าเซลล์ครบวงจร อินเวอร์เตอร์ โซล่าชาร์จเจอร์ สายไฟโซล่าเซลล์ แบตเตอรี่โซล่าเซลล์ อุปกรณ์จับยึดติดตั้งแผงโซล่าเซลล์ พร้อมออกแบบ ติดตั้งโซล่าเซลล์
สอบถามรายละเอียดเพิ่มเติม
http://www.sunnergysolar.com
โทร 0615455353
02-101-8991
Line id: sunnergygrp
http://line.me/ti/p/L1q7kEfcbT