Factory Promotional Mono-Crystalline 300W Solar Panel to Argentina Importers
Short Description:
It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for Factory Promotional Mono-Crystalline 300W Solar Panel to Argentina Importers, We hope to establish more business relationships with customers all over the world.
Mono-Crystalline 300W Solar Panel
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.45V
Optimum Operating Current(Imp) 8.15A
Open Circuit Voltage(Voc) 45.60V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1950x990x50mm
Weight 22.1Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Here’s a 10 watt photovoltaic charger with a 12 Ah battery. You can do quite a bit with this baby. It’s based on a Popular Science DIY article from July of 2008. Let me know what you think. Jocelyn Cohen. Here are the specs:
10-watt photovoltaic (PV, aka solar-electric) panel:
Voltage: max. power 17.6V, open circuit 21.6V
Current: max. power 0.57A, short circuit 0.61A.
Pop Sci used a 5-watt panel, probably to keep costs down, but if Im bothering to build it, I want to get more out of it! The charge controller can handle an even bigger panel, too.
battery:
12 amp-hours
4 amp charge controller:
I love this elegant little thing. Here is the spec sheet from the manufacturer: http://www.vellemanusa.com/downloads/6/sol4ucn2gbnlfresdpl.pdf. The charge controller keeps the battery from overcharging or discharging too deeply, both of which can ruin the battery.
meter:
The Pop Sci article used a 10A meter, which doesnt do much when the panel is only rated at around .6 amps! If about .7 is all youre going to get at peak power, then the 1 amp meter will do the trick.
In the video youll see that I used a cheap multimeter to measure current for now, but Im going to add an analog panel meter like this one between the panel and the controller. Im also going to add a meter or two between the battery and the load to put numbers on what this baby can actually do.
I got connectors at Radio Shack.
Just an update to show how AC Coupling greatly simplifies a DIY System.