Factory Outlets Poly-crystalline Solar Panel 90W Factory for Germany
Short Description:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Factory Outlets Poly-crystalline Solar Panel 90W Factory for Germany, Any requires from you will be paid with our best attention!
Poly-crystalline Solar Panel 90W
Technical parameter
Maximum Power(W) 90W
Optimum Power Voltage(Vmp) 18.33V
Optimum Operating Current(Imp) 4.91A
Open Circuit Voltage(Voc) 21.96V
Short Circuit Current(Isc) 4.89A
Mechanical Characteristics
Cell Type Poly-crystalline 156x104mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1008x678x35mm
Weight 8.0KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*104mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Get much more data on Amazon-US: http://bit.ly/29PQWdj
Renogy 400w Monocrystalline Starter Kit is intended specifically for clients new to solar. The is terrific for off-grid apps, this kind of as Rvs, trailers, boats, sheds, and cabins providing several advantages, which includes, but not confined to, tranquil electricity output and independence. This comes with the equipment required for a 4 100w 12v Panels, a 30a Pwm Wanderer Demand Controller, a 20ft 10awg Mc4 Adaptor Kit, an 8ft Tray Cable, a few pairs of department connectors, and sets of Z-brackets. your experience with a Kit.
Rajiv Pandya has figured out a business plan that is good for the earth and his customers. We are able to see a new section of the energy industry improved with Mr. Pandya’s plan, which expands the market and future for solar energy.
Rajiv Pandya is the President of solar project development company GreanGrid Solar, and Co-Manager of renewable energy investment fund Clean Feet Investors. Based in Houston, Mr Pandya brings deep technical and commercial knowledge of the solar energy industry and extensive management experience from the corporate world. His passion for and vision of sustainability are respected throughout the industry. Mr Pandya earned his BS in Electrical Engineering from the University of Houston and his MBA from the Cameron School of Business. Prior to focusing full time in the clean technology space, Mr Pandya spent over 23 years with The Dow Chemical Company; initially as an Electrical Engineer at their Global EPC headquarter office in Houston, and ending as the company’s Chief Procurement Director for the Asia Pacific Region based in Shanghai, China prior to his departure in 2010.
This talk was given at a TEDx event using the TED conference format but independently organized by a local community. Learn more at http://ted.com/tedx