factory Outlets for Mono-Crystalline 60W Solar Panel to Iran Manufacturer

Short Description:


Product Detail

Product Tags

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of factory Outlets for Mono-Crystalline 60W Solar Panel to Iran Manufacturer, We are also constantly looking to establish relationship with new suppliers to provide innovative and smart solution to our valued customers.


Mono-Crystalline 60W Solar Panel

Technical parameter

Maximum Power(W)                         60W

Optimum Power Voltage(Vmp)        18.46V

Optimum Operating Current(Imp)    3.25A

Open Circuit Voltage(Voc)               22.51V

Short Circuit Current(Isc)                 3.57A

Mechanical Characteristics

Cell Type Mono-crystalline                  125 x 83mm

No of Cell                                           36 (4x9pcs)

Dimensions                                         821x554x35mm

Weight                                                 5.0Kg

Front Glass                                          3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                         IP65 Rated

Output Cable                                       TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*83mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • In this online video I display and convey to how I use a thicker foundation cable with thinner department line cables to make up the cable run for a larger sized 12v parallel wired photo voltaic array when the whole amperage is meant to go properly beyond the thirty amp greatest that you usually be expecting to see with #10 cable.



    http://www.greenjoyment.com So far, the pizza box solar cooker hasn’t worked so well for us, but we’ll keep trying. Maybe it’s the black construction paper we’re missing. You will need: * A medium size pizza box (Pizza Hut boxes work great) * Black construction paper * Extra-wide aluminum foil * Plastic (plastic window covering from a hardware store works best) * Glue * Tape * Scissors * Ruler * Magic marker * String Procedure: 1. Tape foil to the inside bottom of the box. Cover the foil with black paper. Tape in place. 2. Put the box on the plastic. Draw the outline of the box on the plastic with the marker. Cut the plastic about 1/4 inch inside the marks. 3. On the top of the box, draw a line one inch from all sides. Cut along front and side lines BUT NOT along the back. This will be the hinge for the flap. Carefully fold open the flap. 4. Cut a piece of foil the size of the flap. Glue it to the side of the flap that faces INTO the box. Flatten out all the winkles. Wipe glue smears off with a damp towel before they dry. 5. Tape the plastic to the inside of the box. Tape one side first, then the opposite side. Make it tight so it looks like glass. Tape the other edges. Seal tight so no air can get in. 6. Cut a piece of string as long as the box. Tape one end to the top of the flap. Push a small nail into the back of the box so you have a place to tie the string. http://www.greenjoyment.com/solar-cookers

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !