factory low price Mono-Crystalline 200W Solar Panel to Malaysia Manufacturers

Short Description:


Product Detail

Product Tags

We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for factory low price Mono-Crystalline 200W Solar Panel to Malaysia Manufacturers, With a wide range, good quality, reasonable prices and good service, we will be your best business partner. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!


Mono-Crystalline 200W Solar Panel

Technical parameter

Maximum Power(W)                           200W

Optimum Power Voltage(Vmp)           37.29V

Optimum Operating Current(Imp)       5.36A

Open Circuit Voltage(Voc)                  45.48V

Short Circuit Current(Isc)                     5.89A

Mechanical Characteristics

Cell Type Monocrystalline                    125x125mm (5 inch)

No of Cell                                              72 (6x12pcs)

Dimensions                                          1580x808x35mm

Weight                                                  14.5Kg

Front Glass                                           3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                         IP65 Rated

Output Cable                                        TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • My review here: https://www.google.com/url?q=https://goo.gl/VT0k6A&sa=D&ust=1453472790479000&usg=AFQjCNEe8EQpztW3VhsOMQXEHTTA-Ku02A solar panels for sale with connection Box + 0.9M cable, MC4 connector, 12V&24V Auto MPPT solar charege controller.



    http://www.overunity.com/13282/carbonfiber-alufoil-selfmade-diy-battery-with-naco3-or-ashwater-electrolyte

    Hi Guys,
    finally I wanted to show you now my new DIY selfmade battery technology.
    This is very easy to make and puts out quite an amount of small MilliWatts of power.

    Not just yet to light up an 1.2 Volts 0.22 Amps incandescent bulb, but at least it blinks it.

    With a well built Joule Thief circuit this should be able to really power up many LEDs very brightly.
    This will be the next thing I will try.

    So how is this battery be made the cheapest way ?

    You just need Aluminiumfoil from the supermarket,
    a carbonfiber sheet ( This is the only thing you probably have to order,
    as the other parts you will get very easily) and some ashes from a fireplace.
    (woodashes or coalashes) or instead of the woodashes you can also get Sodium Carbonate, that is also called Washing Soda. This is also available is every bigger supermarket. You could also use Sodimpercarbonate from spot removal wshing solution powders , but this is more aggressive and more expensive, so stick with ashes ( it is free) or
    buy some washing Soda.

    So then you take about 3 to 4 teaspons of Washing soda or ashes and put it in about 100 MilliLiters of tap water ( about 1/2 drinking glas full of water).
    Then you use this solution after stirring to put it onto a paper towel and put this wet paper towel between the alufoil and the carbonfiber sheet.

    Then you have just about 1.4 Volts open circuit voltage and more than 100 milliamps of short circuit current. (from a size of around DinA4 sized sheets, so around 20 x 30 cm).

    Now you can stack several cells in series to be able to directly light some LEDs or just use a Joule Thief circuit on ONE cell to light up a few LEDs.
    I will soon build my own powerful Joule Thief circuit and will show this also then.

    So stay tuned to my channel and please subscribe, rate and comment and share it with your friends.
    This is a great battery cell for emergency usage as the only thing that decomposes is the Alufoil ! The carbonfibersheet can be washed off with water and always be reused !

    This is the way to go to build selfmade cheap batteries to power LEDs.

    Hope you enjoyed it.

    Regards, Stefan.Link to this video:

    -~-~~-~~~-~~-~-
    Please watch: “Free Energy Machine ? Scam ? from Witts.ws – QEG ? Scam ? inspired model ?”
    ➨ https://www.youtube.com/watch?v=Y1BInIh_mRQ
    -~-~~-~~~-~~-~- Please watch: “OPV Solar Cell – DTU Organic Solarcell – Free Plastic Organic Solar Cells – first test”
    ➨ https://www.youtube.com/watch?v=EuhDTaLBGq0 Future Tech:: “FREE ENERGY DEVICE – AKULA Blue LED Light Generator”
    ➨ https://www.youtube.com/watch?v=6cSXYeGsO9o Akula FREE ENERGY DEVICE – Akula Lantern Circuit number 4
    ➨ https://www.youtube.com/watch?v=DnuXqnTlJNM ———————————–
    Please watch: “Hydrogen compressed H2 and O2 gas separator split cell by Stefan Hartmann”
    ➨ https://www.youtube.com/watch?v=AikUjB2WXgs Please watch: “Orbo Webinar 2 – Steorn Orbo Ophone OCube and Powercell presentations”
    ➨ https://www.youtube.com/watch?v=hp_pbV9-Yvo —————
    Shop Amazon – Contract Cell Phones & Service Plans

    http://bit.ly/smartphone-offers

    —————————————————
    Try Audible and Get Two Free Audiobooks:

    http://bit.ly/audible-2free-audiobooks

    ————————————————————
    Join Amazon Prime Music. 30-day Free Trial !
    http://bit.ly/amazon-prime-music-offer ================================================

    Now here is a great new Outro Video Maker, what I also use now, how you can very
    easily produce your Outro-Videos for your Youtube Videos, so that they will have these Thumbnail
    Outro Videos to click on, so people stay on your channel. The Outromaker does also add automatically Annotations and Cards!
    Highly recommended. also very good for getting new susbscribers !

    http://bit.ly/outromaker

    ============================= Please support me on Patreon:

    https://www.patreon.com/overunitydotcom

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !