factory customized Mono-Crystalline 80W Solar Panel Manufacturer in Amman
Short Description:
With our rich experience and considerate services, we have been recognized as a reliable supplier for many international buyers for factory customized Mono-Crystalline 80W Solar Panel Manufacturer in Amman, We are looking forward to establishing long-term business relationships with you. Your comments and suggestions are highly appreciated.
Mono-Crystalline 80W Solar Panel
Technical parameter
Maximum Power(W) 80W
Optimum Power Voltage(Vmp) 15.90V
Optimum Operating Current(Imp) 5.03A
Open Circuit Voltage(Voc) 18.58V
Short Circuit Current(Isc) 5.59A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 36 (4x9pcs)
Dimensions 906x670x35mm
Weight 7.2KGS
Front Glass 3.2mm,High Transmission, Low iron, tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length: 900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
johnsolar had an idea. he suggested making a “battery charger” from “solar garden lights”. last year i did an “experiment” with these solar garden lights and realized the potential to “charge batteries” for “free. i decided to go the next step and disassemble the garden lights and see if i could use the “solar panel” and battery holder only. this was a success and i will buy more of these and do a better job of building the box and soldering all the joints. “offgrid” “grid down” “shtf” “teotwawki” “wrol”
http://www.solavore.com/#_a_bctruck
http://www.youtube.com/watch?v=8acs7_vNUm4
*Make sure to wear the proper safety gear when handling electronics.
Happy Thanksgiving!
Check out the new Leak Project Mobile Tour DIY Solar Generator Power Station. With a sleek new Renogy Monocrystalline Foldable 100 watt Panel combined with 3 X 15 watt polycrystalline panels, from Chicago Electric.
Using a heavy duty plastic case and 1000 watt pure sine wave intverter by Xantrex, it also has a 150 amp fuse box, heavy duty cables, new wiring and more.
We power up a 1/3 horsepower metal grinder, house fan, charge a cell phone, laptop, couple car batteries and a couple golf cart batteries.
*Note i made a comment that i thought motorcycle batteries were 6volt because of a faulty battery i’ve attempted to charge. There is both 6volt & 12volt batteries for motorcycles, however most modern bikes run 12volt.